Moody Blu'
04-11-2006, 10:42 PM
I have two complete drives for sale v/8 ratio is 1.61:1
one is on my boat, a volvo 250 aquamtic there is one bolt broken off and has to be drilled out to work properly again drive is rock solid.
other is one i bought when i was thinking about swapping out my 250 for a drive with trim. this drive looks exactly like my 250 except for a few variations and it has hydraulic trim and tilt. when i bought this drive i wanted to make sure the trim worked so I stood on the drive while it was still mounted on the boat i bought it out of and they raised the trim up and down a couple times with me standing on the back to see if there were problems(I weighed about 165) so it works good. the lower unit has a slightly stripped threading and may need to be fixed, or you can just swap your lower form a 250 etc. this 275 had a 302 motor behind it so i figure the drive ratio is correct for a v8. it was also a fresh water only drive and looks pretty good besides the disgusting paint job on it. it has everything you need to add trim and tilt to your older style donzi. the hydraulic pumps and everything is there just swap it and wire it up and fill up the hydraulic fluid.
volvo 250- 800 or BEST offer?
volvo 275T 1550 or best offer?
I also have 2 bell housings for ford motors ONE IS A H&M bell housing the other is painted or powdercoated blue-very nice. not sure if i want to sell my H&M bell housing unless i can adapt it to what i been thinkin about doing.
i am not sure what the market is calling for these drives so please i wont be offended if i am to high. i am sure i will find a good price.
I also have 2 really good propellers.
i have a LH 24 1/2"x 14 1/2" brass prop which was just done last season and it is a awesome prop 375 or best offer
this prop got me up to my highest top speed and still pulls out of the water hard with my motor setup. if i didnt have bototm paint it would be even faster. fuel efficiency is very good as well.
http://i35.photobucket.com/albums/d194/beerock69/me%20pics/boat/DSCF0107.jpg
I also have a RH ultra 26px14 ??? not sure havent looked in a while 450 Or best offer
remember everything is negotiable.
i will even trade for some things if im interested.
I need audi s4 parts and possibly some hardware materials for my tank project and transom stringer reinforcement...
hope this gets some bites!!
one is on my boat, a volvo 250 aquamtic there is one bolt broken off and has to be drilled out to work properly again drive is rock solid.
other is one i bought when i was thinking about swapping out my 250 for a drive with trim. this drive looks exactly like my 250 except for a few variations and it has hydraulic trim and tilt. when i bought this drive i wanted to make sure the trim worked so I stood on the drive while it was still mounted on the boat i bought it out of and they raised the trim up and down a couple times with me standing on the back to see if there were problems(I weighed about 165) so it works good. the lower unit has a slightly stripped threading and may need to be fixed, or you can just swap your lower form a 250 etc. this 275 had a 302 motor behind it so i figure the drive ratio is correct for a v8. it was also a fresh water only drive and looks pretty good besides the disgusting paint job on it. it has everything you need to add trim and tilt to your older style donzi. the hydraulic pumps and everything is there just swap it and wire it up and fill up the hydraulic fluid.
volvo 250- 800 or BEST offer?
volvo 275T 1550 or best offer?
I also have 2 bell housings for ford motors ONE IS A H&M bell housing the other is painted or powdercoated blue-very nice. not sure if i want to sell my H&M bell housing unless i can adapt it to what i been thinkin about doing.
i am not sure what the market is calling for these drives so please i wont be offended if i am to high. i am sure i will find a good price.
I also have 2 really good propellers.
i have a LH 24 1/2"x 14 1/2" brass prop which was just done last season and it is a awesome prop 375 or best offer
this prop got me up to my highest top speed and still pulls out of the water hard with my motor setup. if i didnt have bototm paint it would be even faster. fuel efficiency is very good as well.
http://i35.photobucket.com/albums/d194/beerock69/me%20pics/boat/DSCF0107.jpg
I also have a RH ultra 26px14 ??? not sure havent looked in a while 450 Or best offer
remember everything is negotiable.
i will even trade for some things if im interested.
I need audi s4 parts and possibly some hardware materials for my tank project and transom stringer reinforcement...
hope this gets some bites!!