QuadraJet ID help

[MOP]

I have two Qjets that I need to ID, if they are the right size george and I will give them a try. Bummer is no tags and very little markings but what I have follows.

Primaries 1-3/8"
Secondaries 2-1/4" pltes marked 29909

Back of main body had a small P and a 4, just above on the air horn a 3. Small circle casting mark wity 7046222 within the circle, so far I found they only came in 700 and 800 but varied due to componants.

Phil

P.S. Any help with other possible ID marks appreciated!

[yeller]

Not sure if this site will help or not.
http://www.carburetion.com/carbinf.htm

[MOP]

Thanks a bunch!
I have found that one and maybe 20 others but none have turned up the 70****** number to match, probably somewhat different for marine stuff. A couple had great tuning and setup info, one site can fix the inherent bog that all Qjets have on hard acceleration. Once I ID the carbs I may just send it off to them.

George I may be getting closer!!!!:wink:

[yeller]

...one site can fix the inherent bog that all Qjets have on hard acceleration.
Can you give the link to this site. Thanks

[MOP]

http://www.ponycarburetors.com/default.asp?page=carburetors#rochester