View Full Version : Donzi Emblems / Badges??
penbroke
04-04-2006, 09:02 PM
Where were these (http://cgi.ebay.com/ebaymotors/Donzi-Emblems-Badges_W0QQcmdZViewItemQQcategoryZ33643QQitemZ8053 521832QQrdZ1) "used on many older Donzis"?
Frank :confused:
BERTRAM BOY
04-04-2006, 09:37 PM
I've never seen them before either.
Maybe one of the old guys, like Madpoodle knows.
penbroke
04-04-2006, 09:43 PM
I could tell ya, but then I'd have to kill ya....
punk :D :D :D
Please Sir, do tell...
Frank
...and some days it's worth chewing through your ankle.
onesubdrvr
04-04-2006, 09:44 PM
Hey Scott,
Can I tell him??
I know too!!
Wayne
onesubdrvr
04-04-2006, 10:03 PM
Well,
Looked around a little, couldn't find what I was looking for, but will P/M where I'm thinking :p :biggrin:
Hey if I'm right (or on the right track) great, if not, as it's a PM, no one will know how donzi stupid I am!!
Wayne
CosmoKat
04-05-2006, 09:08 AM
Mattyboy is exactly correct, used on the older 3250's and
some of the 3310 crusiers as a boarding step non skid insert.
onesubdrvr
04-05-2006, 02:44 PM
As usual :confused: :biggrin.:
I was thinking I saw them somewhere like this!!
Oh well,
Score
Moron: 0 Everyone else : A BUNCH!!!
Wayne
penbroke
04-05-2006, 07:54 PM
The Ragazza badge is too much like the ones in question to ignore Wayne's theory... 'Poodle??
Frank
onesubdrvr
04-05-2006, 08:27 PM
I just looked throught the model list again, and found something similar to the Ragazza emblem I posted,
The GT series that came out after the Ragazza could be it, unfortunately the photo's aren't close enough to tell for sure, but could be.
Wayne
onesubdrvr
04-23-2006, 08:59 AM
Did we ever get a definitive answer on this?
Was CosmoKat right?
Just curious, and bored - getting ready to box up some MORE stuff
Wayne
olredalert
04-23-2006, 09:52 AM
--------I bought the first set of these that popped up just for the conversational value. I sort of assumed that they were step-plates as well, but NOOOOO! Be forwarned; they are only 9.5 inchs long and chrome-plated plastic. There is, of course, conversational value. The conversation goes something like, man! is that olredalert guy dumb he just bought a couple of pieces of plastic for twenty bucks!!!!!!!!...........Bill S
onesubdrvr
04-23-2006, 09:59 AM
.....I sort of assumed that they were step-plates as well, but NOOOOO! Be forwarned; they are only 9.5 inchs long and chrome-plated plastic............Bill S
I MUST be close,.... Just measured my Ragazza emblems, 9.5" long as well!
Wayne
penbroke
04-23-2006, 06:09 PM
Well barring any other input I guess I'm gonna have to call this one a victory for Wayne.:wavey:
Sorry about your luck there Red... Do they both slant the same way or is there a right and a left?
Frank:wrench:
onesubdrvr
04-23-2006, 06:35 PM
--------I bought the first set of these that popped up just for the conversational value. I sort of assumed that they were step-plates as well, but NOOOOO! Be forwarned; they are only 9.5 inchs long and chrome-plated plastic. There is, of course, conversational value. The conversation goes something like, man! is that olredalert guy dumb he just bought a couple of pieces of plastic for twenty bucks!!!!!!!!...........Bill S
I dunno, CosmoKat said that they were INSERTS for the boarding ladder, so still a very viable possibility the way I see it
But, maybe, just maybe I'm close
Wayne
olredalert
04-23-2006, 07:25 PM
------Never thought abot the "same", Frank but they are actually. Maybe the second set is the other side. Im going back to the auction and take a peak...........Bill S
penbroke
04-23-2006, 08:11 PM
I'm thinkin' chromed plastic would make for a poor traction insert for a step pad...
Frank:wrench:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.