PDA

View Full Version : VolVo 270 part / Part number needed



mattyboy
04-03-2006, 08:34 AM
looking for the collar or bushing that hold the reverse lock mechanism
on the following link it is part 14 but they don't have part 14 listed
http://www.dougrussell.com/partscatalog/volvo_omc/index.cfm?fuseaction=comp&group=2248&GroupList=2218,2219,2220,2221,2222,2223,2231,2224, 2225,2227,2226,2228,2229,2230,2232,2233,2234,2235, 2236,2237,2239,2240,2241,2242,2243,2244,2245,2246, 2247,2248,2249,2250,2251,2252,2253,2254,2255,2256, 2257,2258,2259,2260,2261,2262,2263,2264,2265,2266, 2267,2268,2269


if anyone has 2 of these that they would like to sell or if anyone has a part number for this item
let me know

Thanks as always

MOP
04-03-2006, 12:28 PM
Matty I doubt like hell if you will find them new, I never had to change any out. I think I know where there is a dead boat with the drive & shield, the trick will be getting them out (salt stuff) will let you know.
In a way if it is just slop I doubt if it will cause any problems, if the tilt lock is screwing up look at Part# 47, if that is binding that will not allow the lock to hold.
PM me what is going on, I know a few tricks.

Phil

LKSD
04-04-2006, 08:12 AM
Feel free to try my site, we should have some 270 stuff online.. Jamie / www.LakesideRestorations.com :)

penbroke
04-04-2006, 06:19 PM
The only info I can find is for the Volvo 270. Part No. 832552-4 described as: "...Plug, early production". No alternative for later production.

I'm not sure what you're doing but I think they vary on the different drives (200, 250, 270). I know the reverse catches and the way they mount vary. I tried to get the ones out of my 200 and ended up cutting the reverse catch to get it out. I expect I'll have to drill them out and make some new ones one of these days.

Hope this helps...

Frank

LKSD
04-04-2006, 07:20 PM
#832552 $42.36 ea + S&H Do you need them?? Volvo shows them as available as of 8:15 Pm today..

Jamie / Lakeside

vrod02
04-04-2006, 07:32 PM
I've got them. email me at bcmunsell@charter.net