PDA

View Full Version : 350 or 6.2


Igotogo
03-23-2006, 05:43 PM
Where did I read an article about the merits of the 6.2 over the 350?
Pismo
03-23-2006, 07:17 PM
It's the same engine just stroked out to 3.75" over the normal 3.48" Full water passages. The main advantage is more cubes! what could be better. Bore it to 4.03 and you have the classic 383.
Last Tango
03-23-2006, 07:29 PM
http://www.donzi.net/forums/showthread.php?t=41706&highlight=MX6.2MPI
tmdog
03-24-2006, 09:17 AM
Like Pismo says. No substitute for torque.
Igotogo
03-24-2006, 12:50 PM
Thanxs for the info. I may look at a 20' sutphen and it has the 6.2




come to 70+ drinks will be on me. (if you can make it):beer:
Pismo
03-25-2006, 09:34 AM
A stroked 350 yielding 377/383 etc is far better engine than the old 400 small block as well. The real trick engines are the new small blocks like the 6.0 inboards. Merc hasn't messed around with these yet but I am sure they will get into it.