bravo 1 26 4blade lab

[bob haver]

i have a brand new 26 lab finish bravo 1 in the box never used with hub kit.i will donate 50$ to registry pending outcome of sale. price is 675$ i have pic's

[whitedevil]

why are you selling the prop and what boat and engine was it made for.I think i am going to need a 26 soon we are going to install a procharger on a 26' zx .i am running a 24 now
496 ho motor

[DonCig]

If any body cares to know, this was THE BEST prop that I had on my Classic 18, 1997 350 MAG Gen + MPI, 1:65 ratio Bravo 1 with an Imco -2" shorty.
This prop rocked on my boat, but no guarantees on yours!

[SMLDONZI]

DonCig, What kind of power were you getting from that 350? and what speed/RPM? I've got the same ratio B1 with a 320 hp 6.2 on my 18 but assumed this would be too much prop for me--Mirage 25 currently. Thanks.

[DonCig]

300 HP 350ci SBC
4,950 rpm
Bravo 1 with an Imco -2" shorty
1:65 outdrive ratio
300' elevation
67.5-68.4 mph GPS
Rock solid ride with a nice bow attitude at WOT
Hands off at WOT, just a little back and forth wiggle at WOT that never progressed into anything uncomfortable or unsettling.
I picked up 1-2 mph with this Mercury Labbed prop. The only other prop that I wanted to try was the Mercury Revolution, which had some good press from Rick S. in Flagstaff AZ.

Talk to Brett at BBlades for further info, but remember, nothing takes the place of actual product testing.

[SMLDONZI]

Doncig,

Thanks alot for the info. I read on the mercury site that this prop is well suited to shallow drives like your Imco. Would be fun to try it out.