sbc exhaust

[jg480]

where should the thrifty shopper look for new performance manifolds & risers for a sbc? :

[txtaz]

I know this is BB but keep your eyes open a SBC setup might come along.
http://cgi.ebay.com/ebaymotors/hi-torque-stainless-marine-bb-exhaust-manifold-riser_W0QQcmdZViewItemQQcategoryZ31285QQitemZ46024 25415QQrdZ1QQsspagenameZWDVW
Da Taz

[DonCig]

I have an almost brand new pair of Dennis Moore GLM aluminum fresh water manifolds (under 10 hours on them) and a San Juan 1/2 fresh water cooling system that could go with them if you are interested.
I am repowering my SBC 18 and could sell you the manifolds if you are interested.

DonCig

[MOP]

These look pretty decent for the $

http://revolutionmarine.com/shopsite_sc/store/html/sbcexhaust.html

[jg480]

I have an almost brand new pair of Dennis Moore GLM aluminum fresh water manifolds (under 10 hours on them) and a San Juan 1/2 fresh water cooling system that could go with them if you are interested.
I am repowering my SBC 18 and could sell you the manifolds if you are interested.
DonCig
Thanks for the offer, but I would prefer to get a complete set manifolds/risers. I live in michigan so I really don't need the cooling system. Thanks again though. Jim

[gcarter]

Ocean East Marine http://oceaneastmarine.com/
has GLM aluminum manifolds for $161.00 and risers for $119.99.
They also carry one of the widest selections of closed cooling systems around.
Also props.

[Sam]

Jim, check with Rootsy, I think he had a set of the GLM's on his 16.

[Rootsy]

Yes i have GLM manifolds and IMCO SS risers on my 16... the GLM's are very light.. castings are ok... a bit of porosity but internally they look good.. and they do seperate runners...

donno if they helped performance or not but they lightened the ass end of the boat up significantly..

do a search under my name... somewhere in the past a year or two ago i did a little comparison fo the GLM's vs stock stuff when i bought the GLM's... photos, etc etc etc...

price is NICE...

[EWPE]

I have an almost brand new pair of Dennis Moore GLM aluminum fresh water manifolds (under 10 hours on them) and a San Juan 1/2 fresh water cooling system that could go with them if you are interested.
I am repowering my SBC 18 and could sell you the manifolds if you are interested.
DonCig

Please PM me with a price.

[raritan]

Let me know if you still have the exhaust manifolds for sale.

[DonCig]

Manifolds no longer for sale. Just watch for Dennis Moore selling his GLM aluminum SBC manifolds on ebay, or go directly to his website at:
http://www.glmmarine.com/