Bravo I, 22P

[onesubdrvr]

Bravo I (4 blade), 22p prop in like new condition

Uses Mercruiser Flo-Torque II hub system, so will fit ALOT of drives.

Used it once on the Ragazza before the drive swap, and now with the drive swap, it's too much prop.

I paid $175.00 for it, same price to you, plus shipping

[Cuda]

Bravo I (4 blade), 22p prop in like new condition
Uses Mercruiser Flo-Torque II hub system, so will fit ALOT of drives.
Used it once on the Ragazza before the drive swap, and now with the drive swap, it's too much prop.
I paid $175.00 for it, same price to you, plus shipping
Wayne, do they make a hub to fit Merc drives?

[onesubdrvr]

Wayne, do they make a hub to fit Merc drives?

Sure do Joe, Also for Volvo and a bunch of outboards. My understanding is if you buy an insert, buy a Mercruiser, not brand X, my first one was a brand X, prop wouldn't go on all the way, and spun it, 2nd was mercruiser, MUCH BETTER...you looking for the TRS?

Wayne

[Cuda]

Yes, I've got a couple props here to find out what should be close for the 22. I'm hoping to have it back this week. I sure hope it runs! :)

[onesubdrvr]

Yes, I've got a couple props here to find out what should be close for the 22. I'm hoping to have it back this week. I sure hope it runs! :)
Joe,

I'm sure it'll be fine,....

If it's not, I'm moving to Michigan,...don't want to be around to see / hear that explosion :eek:

Anyway, not a problem, I'll mark it "reserved" until you tell me otherwise

Wayne

[Cuda]

No need to hold it bro, if someone has the caish, I'll find another, I'm just doing a little pre-shopping. I kind of have my doubts that the 330 will spin the 22 four blade.

[onesubdrvr]

No need to hold it bro, if someone has the caish, I'll find another, I'm just doing a little pre-shopping. I kind of have my doubts that the 330 will spin the 22 four blade.
No problem, TO EVERYONE READING THESE POST, AS OF RIGHT NOW, IT'S STILL AVAILABLE :smile:

I don't know though Joe, My Ragazza has to weigh what, 800+ lbs more than the classic? Also drive ratio on the OMC was 1.43:1, the TRS probably like 1.5:1, I turned it at 4200 with 360 +/- hp, so, it may be a push,....but we'll see. Did you happen to notice what prop you had on there when you purchased it?

Wayne

[Cuda]

I also have the tranny drawing power.

It had some pos aluminum prop that I couldn't even find a number on. It looked to be about a 17, I think he put it on just for the sale. :)

[onesubdrvr]

I also have the tranny drawing power.
It had some pos aluminum prop that I couldn't even find a number on. It looked to be about a 17, I think he put it on just for the sale. :)
Boy, don't that just figure !? :boggled: , makes it hard to shop for props when people do stuff like that to 'ya huh?

Anyway,..... I insist you post right away after you get it in the water and moving in speeds over 10mph! By cell phone if necessary :smile:


Wayne

[onesubdrvr]

OK Guys,

Christmas is gone, prop isn't

Lets get some stuff moved, need money to fix up the X

Here's some pics

Wayne

[BUIZILLA]

SOLD

pm me the payment details

[onesubdrvr]

PM is on the way, and Thank-You

Wayne

[Garrbo]

Bravo I (4 blade), 22p prop in like new condition
Uses Mercruiser Flo-Torque II hub system, so will fit ALOT of drives.
Used it once on the Ragazza before the drive swap, and now with the drive swap, it's too much prop.
I paid $175.00 for it, same price to you, plus shippingIs this prop a SS 15"x22 I think I need this size, but 2 o them. I have twinn 454 aproxx 375-400 hp on my Z33 87 crossbow ( refurbishing, hope to be done and floating by mid may) and could use some help proping it. Ideas anyone?

[onesubdrvr]

Is this prop a SS 15"x22 I think I need this size, but 2 o them. I have twinn 454 aproxx 375-400 hp on my Z33 87 crossbow ( refurbishing, hope to be done and floating by mid may) and could use some help proping it. Ideas anyone?
Can't really help you on that boat / motor combination, sorry, try a post in the performance section.

This prop worked pretty well with my 365hp SBC in my 21' Ragazza. The prop has been sold, but, depending on what the Guru's say, I have a turbo I 22p available. Hubbed for an OMC Cobra drive.

Thanks
Wayne

[Rootsy]

Cuda, dont you have a 21ish cleaver?

which i believe used to be mine ;)