MOP
11-28-2005, 10:37 PM
We all like to do a bang up job of covering our favorite TOY! Many forget good ventilation, to tightly covered will sweat with each temp change. Shrink wrap must have a few vents added it does not breath at all, it should be avoided on painted hulls, our yard has ruined a couple. If left in direct sun light the paint will blister, this can happen as soon as temps go above freezing. You can make up simple J tubes out of 2" PVC carpeted to be hung over into the cockpit area and extend down out of the cover, cut the tubes at 45 degree's to catch what ever wind there is. Cut one 45 facing your predominant wind direction the other just the opposite, one will push and one will pull the air through the boat.
Phil
Phil