rustnrot
09-03-2005, 09:54 AM
Last week I got a mid '60's Ski Sporter 16. No engine nor outdrive "foot" was included. It still has attached the Eaton outdrive housing. I have loosened the flange that holds the rubber bellows to the transom. I have also removed the two very large bolts that hold the drive housing to the transom housing mounts.
It appears there are 4 bolts that must be removed from inside the transom side housing before I can separate the inside transom part of the drive housing from the outside transom housing. I can see two socket head screws at the top from the inside. I cannot spot the bottom screws. How to I remove this?
I also have no use for this. Does anybody need it? The pics show what is included.
It appears there are 4 bolts that must be removed from inside the transom side housing before I can separate the inside transom part of the drive housing from the outside transom housing. I can see two socket head screws at the top from the inside. I cannot spot the bottom screws. How to I remove this?
I also have no use for this. Does anybody need it? The pics show what is included.