oceancontainer
08-15-2005, 07:22 PM
Our company is growing and we are in the market for a portable yet large volume sandblaster. We will be using it primarily for knocking off paint and rust on trailers and alot of other uses with concerning steel snd whatnot. We have a skid mounted Sullair 125 CFM air compressor sitting in the shop with nothing to do except collect dust and I wanted to ask some of the more knowledgeable vetrans here what they reccommend for a sandpot and if I have enough air supply to operate the sandblaster and finally how big of area should I expect the nozzle to spray out vs the tip of the gun....
I am thinking of the amount of time it will take to clean an area 8'6" x 20' and I am looking at something that is feasiable and dosent cost my arm and left nut.
If you would please send me you thoughts and or opinions to my e-mail address as I do not get on the board that often and this is my first post...
o11660@yahoo.com
Thank you in advance,
Terry Hensley
I am thinking of the amount of time it will take to clean an area 8'6" x 20' and I am looking at something that is feasiable and dosent cost my arm and left nut.
If you would please send me you thoughts and or opinions to my e-mail address as I do not get on the board that often and this is my first post...
o11660@yahoo.com
Thank you in advance,
Terry Hensley