dr
07-13-2005, 02:39 PM
In a routine check of fluids I found evidence of moisture in my Alpha 1 power trim pump fluid. It’s operating fine. There is no evidence of a oil leak on the floor where the boat is stored. The cap was loose but on the filler neck. The boat is a very dry boat and I don’t suspect that being the problem.
I am not that mechanically inclined, so any ideas as to how this happened, how I can verify, and what I should do and how would be greatly appreciated.
I am not that mechanically inclined, so any ideas as to how this happened, how I can verify, and what I should do and how would be greatly appreciated.