PDA

View Full Version : Z33 Cabin Door



87Z33
07-09-2005, 05:57 PM
Does anyone out there have dimensions for a Z33 87 Cabin Door? The plexi door, not the chrome pop-up lid.

Is it one piece or is it hinged in the middle?

I would appreciate any pix if anyone has one.

Thanks,
Bryan

iznod33
07-23-2005, 10:04 PM
It is just a rectangular piece of 1/2' smoked plexiglass with a chrome accent set at a angle. It measures 35-1/2" X 23-3/4". I will attempt to upload a photo.

Holly

Donzigo
07-23-2005, 11:06 PM
After tha year, it became a hinged two piece door.

87Z33
07-24-2005, 06:58 PM
Thank you Holly and Richard !

I might try to do a 2 piece door, may be easier to open/close in a tight space.

There are very few pix of boats with the door closed, not something many people want to show off I guess!

Holly, I like the red accents in your interior...is it stock or did you do it?

Bryan

iznod33
07-25-2005, 09:35 PM
We just acquired our boat 3 weeks ago, so I don't know what is original and what may have been re-done- but our interior is REALLY red!!

Our single piece door doesn't seem to be too much difficult to open and close, but if your fingers are in the wrong place-ouch!

Holly







Thank you Holly and Richard !

I might try to do a 2 piece door, may be easier to open/close in a tight space.

There are very few pix of boats with the door closed, not something many people want to show off I guess!

Holly, I like the red accents in your interior...is it stock or did you do it?

Bryan

Donzigo
07-26-2005, 01:00 AM
The original interior was grey........2 or 3 shades of it.

87Z33
07-26-2005, 05:45 PM
The mix of gray was not very attractive from what I have seen in pix, my boat still has some of the gray(blueish) material around the berth entry....will remove it when we redo the cabin....which might have to wait until the fall. I love the all white of DonziGo's boat!

I am thinking I might like to etch a curvy Z into the plexi cabin door if I can come up with a large enough image to use as a pattern.
Anyone have a good image available?

87Z33
08-18-2005, 03:51 PM
Curious what the latch / lock looks like? I got my 1/2 smoke plexi...took forever but the price was right.

Does anyone have a pic of the door latch handy?

Thanks,
Bryan