PDA

View Full Version : Late model, low hour 350 and 496 motors


blackhawk
07-05-2005, 02:19 PM
If anyone is looking for replacement motors I have an excellent source. They are COMPLETE Volvo Penta motors with about 20-30 hours on them. They can easily be converted to a Mercruiser system by just swapping the bell housing, coupler and motor mounts.

I can get the 280hp and 320hp 350s and the 375hp and 420hp 496s. PM me if you are interested.
blackhawk
07-06-2005, 08:22 AM
Here are some prices:

5.7 Gi(280pshp)-$5000
5.7 GXi(320pshp)-$5200
8.1 Gi(375pshp)-$6000
8.1 GXi(420pshp)-$7000

Here's a couple pics of one of the actual motors.
Trueser
07-06-2005, 10:52 AM
Are they the ones from Michigan Motorz?
blackhawk
07-06-2005, 12:28 PM
No, as fas as I know Michigan Motorz builds their own marine motors off the Vortec base. These are factory Volvo Penta motors.
blackhawk
07-07-2005, 10:18 AM
And remember these motors are 100% complete. Everything is there. Even the power steering lines! I pulled my motor and had a 5.7 GXi in and running in less than 4 hours!

Pretty good deal on the small blocks and a great deal on the big blocks!
Cuda
09-07-2005, 03:14 PM
Are the 320 horse 350's or 6.2's?
ChromeGorilla
09-07-2005, 03:32 PM
Hell, Cuda, for 6 or 7 G' s the Minx would be schweeeeet. Not that it aint already.... :biggrin.:
Cuda
09-07-2005, 03:48 PM
Hell, Cuda, for 6 or 7 G' s the Minx would be schweeeeet. Not that it aint already.... :biggrin.:
That's the other option I'm weighing. :)
blackhawk
09-07-2005, 04:59 PM
Are the 320 horse 350's or 6.2's?

Cuda, the 320 hp is a 5.7GXi. That is what I am running in my boat. :yes:
Cuda
09-17-2005, 06:26 PM
Cuda, the 320 hp is a 5.7GXi. That is what I am running in my boat. :yes:
Are you running a Merc drive in it?
JPR
09-17-2005, 10:36 PM
Is this a one time type of thing - I need a motor, but not untill april or may 2006. I'm assuming that you are running a blackhawk drive with your 5.7, but do you also have a line on volvo drives?
blackhawk
09-26-2005, 12:55 PM
Are you running a Merc drive in it?

No, I am running a Volvo SX drive. To run a merc drive all you need to do is swap out the engine coupler and the bell housing.
blackhawk
09-26-2005, 12:57 PM
Is this a one time type of thing - I need a motor, but not untill april or may 2006. I'm assuming that you are running a blackhawk drive with your 5.7, but do you also have a line on volvo drives?

No my blackhawk is gone. And it's not a one time thing. I can get whatever he happens to have. And yes I can get Volvo drives as well.
Boatnuts
09-26-2005, 01:35 PM
What is the price of a 320 HP
olredalert
09-26-2005, 02:20 PM
-----Boy!!! Those are seriously good prices. Ill bet Volvo doesnt put the wrong roller-lifters in thier motors either!!!!
-----I just had an odd thought. Not unusual, but I digress. Did this part of Volvo stay with the truck division when Ford bought the car division or is a division of Ford now building high-performance GM boat motors? I suspect I know the answer, but the scenario would be weird. As a third option maybe the marine division is completly seperate from both???..........Bill S
Cuda
10-02-2005, 11:13 AM
Does the Merc wiring harness plug in?
blackhawk
10-07-2005, 02:30 PM
Does the Merc wiring harness plug in?

Yes it does.
EWPE
11-28-2005, 09:30 PM
Are the 350's still avil. If so what do you think shipping would be to NJ.