Garage Sale!!

[onesubdrvr]

Got some stuff for sale from the rebuild,.... best offers on all, plus shipping, a percentage to the board!!

1 MSD Marine Shift Assist -pt# 4489 (required for after market ignition) new from Jegs $86.99 sell $75 includes shipping

CompCams pt# 4808-8 5/16 guide plate for push rods (roller rockers) - new from Jegs $21.99 sell $15.00 includes shipping

Precision Engine Parts pt# PRK651 3/8" rocker studs (16) - $25.00 includes shipping

ARP # 134-3601 SB Chevy Hex head bold kit - New from Jegs $53.99 sell $40.00 includes shipping

ARP # 134-5202 SB Chevy 4 bolt large journal main bolt kit - New from Jegs $25.99 sell $20.00 includes shipping

Cloyes 9-200 Roller Cam Button New from Jegs $14.99, sell $10.00 includes shipping
Cloyes 9-201 Roller Cam Wear Plate new from Jegs $11.99, sell $7.50 includes shipping

Used Marine alternator $20.00 plus shipping

Used Power Steering Pump $20.00 plus shipping

Misc. Exhaust parts (4" x 3" 90* elbows), pair, good condition $25.00 + shipping

Misc. Exhaust parts (4" round x 4" (?) oval - supposidally off of big block mercruiser), pair, good condition $25.00 + shipping

OMC - Chevy SB Bell Housing $40.00 + shipping

3" x 90* pair of aluminum exhaust tips - pretty pitted from corrosion, but no holes or leaks, can be polished up, will take time, has rubber flaps $15.00 + shipping

Remote oil filter mount this was on OMC, mounted it remote on the alternator bracket (alternator top right on block), includes alternator mount, steel braided hoses, original port block off and new housing for filter $50.00 + shipping

4" Trident Wet Exhaust Hose (2 12" lengths) $10.00 - **pending - $2.00 to board

approx 20 yards of 7oz woven roving fiberglass - give me a fair offer, I forgot what I paid, guess I could look it up? **SOLD - $13.50 to board

Some other stuff to be listed later, P/M me with any offers, this stuff has got to go before I move, before I get rid of the Ragazza, and before I get my new boat.

[sweet 16 1966]

I could put up thr woven rovin for a later project. How much to move?

[onesubdrvr]

I could put up thr woven rovin for a later project. How much to move?
Russ,

Let me measure it to make sure I'm right on the length, then I'll let you know

Thanks!
Wayne

[onesubdrvr]

Russ,


I originally ordered 51 yards, I used approximately 12 yards, then I traded the boat I was working on for the Donzi. I'll assume I only have 30 left. Sells on Fiberglast.com for $6.00/yard, I'm assuming I got $1.00/yard discount for ordering bulk, I'll sell for $4.00 / yard. 30 yards, $120.00 plus shipping (from 34953) scale says 18lbs, let's assume 20lbs for shipping costs, plus, I'm gonna take it to the UPS store, probably $5.00 to box it up.

Wayne

[sweet 16 1966]

I will take it.
Russ Kilby
1245 Fontainebleau Court
Lawrenceville Ga. 30043

[Ernie Gibson]

Hey Sweet 16.....If you put more glass on that 16 footer it's goin to weigh 3,000 lbs...

[onesubdrvr]

I will take it.
Russ Kilby
1245 Fontainebleau Court
Lawrenceville Ga. 30043
Russ,

Great, I'll ship it out no later than Saturday

Wayne Holtzclaw
2381 SW Freeman St.
Port St. Lucie, FL 34953

Thanks
Wayne

[sweet 16 1966]

I will do my part.

Thanks Wayne!

[Mahi "Z"]

Wayne, I see at the bottom of your post u are getting rid of the regazza. What do you want for it? I got side tracked from my interior project on the 88 23' cuddy. to replace all the floor in the v-berth. I need your interior at least the back half. That was a sweet pic u emailed me. I will be back in sebastian for the weekend. If your going to be around i would at least stop by and see how your sun pad and seats were installed. Thanks Mike

[onesubdrvr]

Adding some pictures of the used parts that I have for sale, I doubt anyone here will have any use for, but let me know,....

10% goes to the board, thanks to Sweet 16, we've started it, $13.50 so far

Wayne

[vonkamp]

Do you know if the chevy bellhousing will fit to a volvo 270 drive??
thanks,
Baron

[18FOOTER]

do you still have the 4" wet exhaust hose? e-mail byost@krapohl.com thanks, bob:cool!:

[onesubdrvr]

Do you know if the chevy bellhousing will fit to a volvo 270 drive??
thanks,
Baron
I have no idea, I don't think so, but I'll try to post that question on the performance area and see if we get an answer

Thanks
Wayne

[onesubdrvr]

do you still have the 4" wet exhaust hose? e-mail byost@krapohl.com thanks, bob:cool!:
Bob, you have mail!

Thanks,
Wayne

[onesubdrvr]

Do you know if the chevy bellhousing will fit to a volvo 270 drive??
thanks,
Baron
No, will not work,....

Thanks for looking!!
Wayne

[onesubdrvr]

Please see original post for updated pricing - I went back and checked Jegs pricing, and adjusted mine accordingly (for new stuff)

And remember, when all is said and done, %10 goes back to the board - total so far $13.50

Thanks for looking
Wayne

[18FOOTER]

Wayne, you have mail again.

[onesubdrvr]

Thank-you 18 Footer,

and another $2.00 to the board

Wayne

[raritan]

Hello from Arkansas,

let me have a good board price if you still have it...

email me at
thomas@yellville.net

[onesubdrvr]

OK,

As of this evening, 10% has been donated to the Registry - $20.50

Still have most of the stuff available, also,

Set of V-6 Manifold / risers (one piece / side) off of OMC engine
V-6 / V-8 Exhaust y-pipe

Also, since I've gotten the Donzi, I haven't used my wood working stuff much, so am considering getting rid of some of that too. Includes

Delta 13" Portable planer
Delta 6" Jointer
Chicago Electric Table top table saw, mortising machine with bits, biscuit joiner
Craftsman Radial Arm Saw
Delta Band Saw - table top
Also have a Curtis ES-5 air compressor, 3hp 1stage, 12cfm @ 100psi, needs some tubing work, but works.

Don't worry, I'm keeping all my hand-held stuff for repairs to the boat if needed.

Let's see how much more we can get for the board, and how much closer I get to my new boat!!

Wayne

[onesubdrvr]

TTT,...


Also, am listing my floor model wood working stuff

Craftsman 10" Radial Arm Saw - paid $150.00 for 2 years ago, very little use, will sell for $75.00

Delta 6" Jointer - Paid over $300.00 new approx 2 years ago, will sell $150.00

Delta 12" Planer - Paid over $300.00 new approx 2 years ago, will sell $150.00

other misc. wood working stuff,

Harbor Freight mortise machine - paid $100.00, sell $60.00

Harbor Freight dovetail fixture - paid $40.00 - never used, $25.00

Also, most of the parts on the first page still available, make me an offer on 1 item, or all of it, it's got to go!!

Wayne

[mrfixxall]

Do you know if the chevy bellhousing will fit to a volvo 270 drive??
thanks,
Baron

i do.....

[drivinmy89bayliner]

Wondering if by chance you still have the msd shift assist 4489.

[jvcobra]

I have one available if you need it.

[drivinmy89bayliner]

Ya if you have one I'll buy it.