2005 22 Classic-Livorsi Depth Gauge problem

[VinV]

Having a problem with the gauge bouncing all over.

I get no help from Livorsi except they sent a new gauge and inside-the-hull sender.

Anyone have this problem?

My guess is the gauge or the routing of the sender cable.

It is a good amount of work to replace the sender so I asked the question here.

Next step is to try the gauge first.

[RickSE]

Fish?

[Barry Phillips]

On my 22, I was loosing my bottom signal. The fix was simple since the epoxy holding down the transponder simply dried out and the puck was bouncing around. Also check your ground connection behind the gauge and at the transponder.