PDA

View Full Version : Rubber deck coatings



MOP
06-03-2005, 09:06 AM
I am looking for an easy to apply maybe roll on deck coating for my cockpit, all input appreciated.

Phil

Morgan's Cloud
06-03-2005, 12:04 PM
Phil ,

Are you doing this to clean up and re-finish it or are you wanting to do a non skid type finish ?

Steve

MOP
06-03-2005, 02:15 PM
Phil ,

Are you doing this to clean up and re-finish it or are you wanting to do a non skid type finish ?

Steve

Hi Steve

I think I have found a good product but more input is always good!

I have done some cockpit glass work, a small area of delaminating, center hatch glassed in and the now rear seat storage well made and glassed in. I intend to paint all the horizontal surfaces and maybe up the cockpit sides an inch or so. Most all wear surface will have either cushions or carpeting. I would like a roll or brush on paint, Pettit Easypoxy does both well.
I was hunting a rubber based marine product but found out they proved not that durable unless you go mega bucks, all the former marine stuff has gone by the way. What seems to come up the most as a good product is the Pettit Easypoxy, all seem to agree it is near indestructible with excellent adhesion and very reasonable price wise.

Phil