PDA

View Full Version : 91 Scarab Viper



harbormaster
05-31-2005, 08:27 AM
Circumstances dictate that I should sell this puppy and regroup. Its an awesome offshore boat. I have spared no expense.

Its is a Larry Smith Design 31 foot Scarab Viper flat deck

Two newly built 502s (500hp each).new cams, pistons, rings, valves,etc.
2 piece aluminum Hardin Marine Valve covers.
Davinci Prepared 850cfm holley double pumpers.
Full Latham dual ram steering with tilt column and Dino wheel.
2 New mercruiser wiring harnesses.
Gaffrig instrumentation.
Mirage props reworked.
Late model newly rebuilt transom assemblies with all new seals boots and gimbal bearings( never seen salt).
All new gelcoat on hull, in cabin, and in engine compartment.
new trim pumps with stainless brackets, K-Planes.
Newly rebuilt hatch actuator.
149 gallon fuel tanks has been recoated and in in excellent shape.
Lots of extra parts.
What does it need? It comes with two Bravo one outdrives that need the skegs on the lower units repaired. I already have one set of exhausts off a 496 which are made by GIL. It needs one more set. For the most part that is it. It does not come with a trailer. email me at scot@wirez.com if you are interested. I am asking 22k for everything.

pmreed
05-31-2005, 08:53 AM
Gawd Scott, If I was looking for a bigger boat, I'd snap yours up. After all the work and part scavenging you've done, it's gotta be heartbreaking to let it go :( .

Phil

Ed Donnelly
05-31-2005, 08:58 AM
31' ? ......Ed