Part Duex

[onesubdrvr]

OK,

I'm running 343 CSHP, so 313 PSHP, let's say I wanted to add another 100-125hp

350 SBC, Vortec heads, mild cam, roller everything

I've considered a supercharger, but with 10.1:1 ratio, I'd be pretty darned limited in boost,...I guess I could add spacers to reduce the ratio to 9.0:1 and go from there?

I'm looking into a bigger cam,...

I don't want to take the engine all the way apart again as I JUST got it back together,..

Any other suggestions?

Just throwing around some ideas,...

I have a post about a BBC conversion re: dimensions.

Thanks in advance,
Wayne

[florida gator]

When you get it figured out let me know. I'm hitting 50 mph wfo on a good day. I would like a little more than that.

[MOP]

You guys all forget there is a search button up top, there have been some very good cam posts. I know if I decide to swap bump sticks that is where I will go.

Phil

[Cuda]

Those are some pretty big numbers for a naturally aspirated SBC. It could be done, but I think you'd give up some reliability. Those numbers are on the edge.