PDA

View Full Version : Nice HM 16



MOP
05-20-2005, 10:28 PM
This looks like a real nice boat.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=31270&item=4550404438&rd=1&ssPageName=WDVW

Oop's Just found another!

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=31270&item=4551461154&rd=1&ssPageName=WDVW

Phil

mattyboy
05-21-2005, 06:54 AM
I like the one that was hand laid up by Don himself must be a special boat seeing Don was gone for over a year or so ;)


but seriously what is up with the interior of the white boat restore to what???


the blue boat is 20 hulls after mine and looks to be the same setup has mine i bet it is not cored but a solid fiberglass deck with pvc pipe supports and well yes the tank must be shot mine 410 Tony Sporer's 420 both needed tanks
it has the old style donzi wheel and if you can stomach replacing the tank
i would think no coring issues might be a nice project
looks like the eaton is gone looks like a volvo drive same as mine started as an eaton then got repowered or re placed drive when more reliable come along
diggin the donzi blank for the gauge too same vent setup too
cotton candy blue with candy stripe interior I sorta like it ;)

Rootsy
05-21-2005, 08:25 AM
some people just crack me up...

JR

boxy
05-21-2005, 09:35 AM
Jamie, when you come to the Islands this summer, I'll show you the sister boat to the blue one. It's tucked up high and dry in the rafters of a boathouse on an island on the Canadian side of the river.

Dr. Dan
05-21-2005, 09:53 AM
:wavey: East Berlin is about 40 minutes from me if anyone is interested...

Doc :D

Rootsy
05-21-2005, 07:06 PM
:wavey: East Berlin is about 40 minutes from me if anyone is interested...

Doc :D

will you take candles and your wegee board so you can summon don himself to make sure he actually laid up this hull with his own 2 hands??? :banghead: :banghead: :banghead:

JR