22 Classic Hatch Chrome Strut Screw Covers!

[Dr. Dan]

:wavey: I am posting this for my Gay Lover...."Johnny Revlon" he wants to acquire more Bling for his 22 Classic. I am looking for pics of Newer 22 Engine Hatches to show the 1" by 3" Chrome Trim Covers that go over the 2 Screw Heads that show on the Top of the Lid(Hatch) of the Newer 22's.

Johnny's is LipStick Red and Anglo White, as you all know...but on his '95 he just has the Screw Heads there...exposed. He wants to order the Covers...or the Newer Style hardware to adapt his...he finds he is screwed enough in life...and being persecuted as Johhny Revlon here is at times...unbearable...but he...he's my Biotch Boy! :smash:

So if anyone has a Pic of there Engine Hatch showing this Gas Strut Brace Covers...I will get them ordered thru Lakeside Restorations...Jamie is great at getting these type of items.

Doc Maybelline :rlol:

[ChromeGorilla]

Never mind..... i know not what I'm talking about...... brain fart edited out...

[ChromeGorilla]

Oh Danny boy....quick hijack here....just upped my bling this weekend...litteraly....It friggin rocks too!!!! :wink:

[Dr. Dan]

:rlol: Post some pics...also post a shot of your hatch on the boat...yours should have these covers
Doc :smash:

[ChromeGorilla]

Done deal...tommorrow by noon. But you only get the hatch and strut detail. Bling will be unveiled at poker run this weekend... :wavey:

[Dr. Dan]

:bonk: Got it Sub Boy!

Doc

[boxy]

Chromey, that shiny skeg-gard is going to look sweet......

[ChromeGorilla]

It sure will. I had some aluminum hockey sticks (cuz ya know theres alot of em layin around lately) melted and then grafted a new tip onto the skeg.... :rlol: :rlol: :rlol:

[txtaz]

Ooooppppssss.

[Dr. Dan]

:smash: Thanks Poodle...I am gonna sick Jamie (Lakeside Restorations)on this Task...he got me my Latch Lock Springs and Washers from Donzi inside of 3 weeks...I have been after Donzi for over 2 years to even reply....on that part.

I think we should begin a "Funky Watcha Macallit Part Registry and Source Listing" for replacement parts...this is always a problem with these type of Random Replacement Parts. :bonk:

Doc :rolleyes:

[gcarter]

:smash: Thanks Poodle...I am gonna sick Jamie (Lakeside Restorations)on this Task...he got me my Latch Lock Springs and Washers from Donzi inside of 3 weeks...I have been after Donzi for over 2 years to even reply....on that part.

I think we should begin a "Funky Watcha Macallit Part Registry and Source Listing" for replacement parts...this is always a problem with these type of Random Replacement Parts. :bonk:

Doc :rolleyes:
Yup!
Jamie is the answer.

[BUIZILLA]

:wavey: I am posting this for my Gay Lover...."Johnny Revlon" welp Doc, i'm sure you and Lizard have one of those *agreements*, but hey, the secret is safe with us.... :cool:

JH

red and teal just looks oh_so_sweet together

[ChromeGorilla]

I think MP is right. I wasn't sure and didn't want to open my mouth and look like a dumbass. When I had my hatch off it looked like there is two studs shot to the back side of that plate. The strut has a bracket with 2 holes the studs go through with (2) 3/8" lock nuts securing it.

[Rootsy]

on my 16 it is a plate with studs, extending through the hatch... strut bracket slips over studs, add nuts and go...

if i knew the hole spacing desired i could probably make one without too much of an issue...

[Dr. Dan]

:puke: :wink: :spongebob Post Pictures...Please!!!

Doc

:shades: Liz know she has to share me...with Pretty Boy Floyd!

[gcarter]

I just ordered mine from Jamie (jw) .....$28.63 each. Two weeks delivery.

[Stan]

Could somebody PLEASE post a picture of what the hell you're talking about !!


BUT.....Being that I havent seen this item yet...........I WANT SOME !!

Stan :propeller

[Stan]

How about a pic.

[Dr. Dan]

:wavey: Pics? :smash:

[LKSD]

Mad poodle was correct about Donzi & the stud plate for the top side not coming with it... I have one set coming for MR Carter.. As soon As I have the correct package price I will repost the accurate $ on the thread.. I pulled it temporarily so as not to mislead any board members... Jamie :boat:

[Lenny]

I would be interested in the whole "sha-BANG" if you can get it. Hatch brackets, cover, inner deck hatch bracket and gas struts (2) for my 18. I don't like "looking" into my motor compartment at sea and then find myself doing a "double sow-cow with triple toe loop" in the middle of nowhere hanging onto this hatch that I had no intention of coming off the pins and into my arms :eek: I have already lost one on land and I really don't want to lose one at sea too...

[LKSD]

I will try to repost with the correct prices on monday, after I hear back.. Jamie :biggrin:

[Dr. Dan]

:rlol: Here is what Dwight is looking for!

:smash: Doc

Jamie let me know how he has to buy these...if it is part of an entire Bracket Assembly or not?

[thriller]

Or you could get them in Gold!:smile:

[Lenny]

Here is the whole shebang that is on Mike Millers' Blackhawk. All three parts.

In Pics :D

http://www.rexmar.com/page55.html

[Air 22]

Here is the whole shebang that is on Mike Millers' Blackhawk. All three parts.

In Pics :D

http://www.rexmar.com/page55.html



OK..LENNY has posted a pic of what I want. IT IS THE OUT-SIDE FLAT PLATE in PIC #1...all the other stuff I have on my existing set-up.

WHERE CAN I GET TWO? HELP!!!!! Please list part # if possible..Thanks...JR :biggrin:

[gcarter]

jw, jw, jw!!!

[Lenny]

I want the whole works. All three pieces ... please ... :)

[LKSD]

I am waiting to hear back yet as to the cost of the last piece (flat outer plates). as soon as I do I will let all of you know.. any one interested may call me or email me a daytime # to call them at & I will let them know when I get the part price in hand for the outer piece.. Jamie 570-639-2628 :wavey:

[LKSD]

:rlol: Here is what Dwight is looking for!

:smash: Doc

Jamie let me know how he has to buy these...if it is part of an entire Bracket Assembly or not?

I should be able to..

[penbroke]

Is the plate on top of the hatch plated or stainless?

Is it a cover over the screws or deos it have threaded studs attached to it?

I need to rig up something for the hatches on my 18.


Frank

[Lenny]

Frank, it is a flat, plated, chunk of something plated, be it gold or chrome. Studs are welded to it to protrude into the underside of the hatch where it mates with what you see in the picture. Simple stuff, only try and find it :rolleyes:

I am also doing what you are thinking you are doing...

[penbroke]

I am also doing what you are thinking you are doing...
Just don't do what I did. :eek!:

(See my thread in the "wanted" section.)

Frank

[LKSD]

To whomever may be interested in the hatch Bling bling from Donzi… Here is the current info.. All stuff takes about 2 weeks or so to get to you once ordered.. If interested please call me to place your order by credit card.. Thanks… Jamie / Lakeside Restorations 570-639-2628 :yippie:

Stud plate for hatch strut brackets $49.10 per set

Upper hatch & lower strut mounts for both sets $28.63

Gas struts $98.94 per set

Please contact us for the appropriate shipping for what you would like to order. I had to pull the shipping prices as I just recieved my actual invoices & need to make the proper shipping adjustments per order... sorry for any confusion with the shipping... 570-639-2628 :moped:

Fyi : once Donzi stops using a certain part on their boat lines it is discontinued from their inventory & is no longer available. However if you find yourself in need of a part like that I have access to countless aftermarket & OEM suppliers & can usually get what you need, just not always.. Also please remember us for your Mercruiser & Volvo-penta needs, as I have a huge DISCOUNTED online microfiche available to the public.. Thanks & enjoy the boating… Jamie & Kristin Lakeside Restorations . com (http://www.lakesiderestorations.com) :boat:

[donzi182003]

Hey guys. I dont know why these things are so hard to come by. They are OEM on the newer boats my boat came with them from factory and my 2 buddies boats have them too.I called donzi yesterday and if you have a defective part they say they will replace it. One screw stud broke off of mine when I reinstalled the hatch after an exhaust tip mod. Be careful not to over tighten them when installing them becuase you will break the weld. Getting them from the gentleman above seems like a much easier process than dealing with the factory :p


Ed

[Lenny]

To whomever may be interested in the hatch Bling bling from Donzi… Here is the current info.. All stuff takes about 2 weeks or so to get to you once ordered.. If interested please call me to place your order by credit card.. Thanks… Jamie / Lakeside Restorations 570-639-2628 :yippie:

Stud plate for hatch strut brackets $49.10 per set + shipping (6.00 + 2.00 for each addtl pair of hatch stuff)

Upper hatch & lower strut mounts for both sets (pair of each) $28.63 + shipping (same as above)

Gas struts $98.94 per set + shipping (same as above)

Fyi : once Donzi stops using a certain part on their boat lines it is discontinued from their inventory & is no longer available. However if you find yourself in need of a part like that I have access to countless aftermarket & OEM suppliers & can usually get what you need, just not always.. Also please remember us for your Mercruiser & Volvo-penta needs, as I have a huge DISCOUNTED online microfiche available to the public.. Thanks & enjoy the boating… Jamie & Kristin Lakeside Restorations . com (http://www.lakesiderestorations.com) :boat:

$49.10 + $28.63 and $98.94 will do me just fine Jamie. Let me know what you want for shipping the stuff? UPS is fine by me.

I will take the whole deal when you are ready.

[LKSD]

HERE IS A PIC OF THE HARWARE PEOPLE ARE TALKING ABOUT.. jAMIE

[LKSD]

$49.10 + $28.63 and $98.94 will do me just fine Jamie. Let me know what you want for shipping the stuff? UPS is fine by me.

I will take the whole deal when you are ready.

I AM NOW TAKING ORDERS, PLEASE CALL ME TO PLACE YOURS... THANKS.....
jAMIE / LAKESIDE RESTORATIONS (http://WWW.LAKESIDERESTORATIONS.COM)NS 570-639-2628 :lifeprese

[Greg K]

I AM NOW TAKING ORDERS, PLEASE CALL ME TO PLACE YOURS... THANKS.....
jAMIE / LAKESIDE RESTORATIONS (http://WWW.LAKESIDERESTORATIONS.COM)NS 570-639-2628 :lifeprese

Jamie,
Do you now the center to center measurement on the studs?

Here's some brackets for less than half if they measure up.
Stainless Angle bracket with stud $2.65 ea. (http://www.thomasregister.com/smartcat.cgi?az=72827629&type=details&ptno=SPD-BR-1015-SS&template=http://www.spdhardware.com/spdecomm.htm)
Straight stainless bracket $2.65 ea. (http://www.thomasregister.com/smartcat.cgi?az=72827629&type=details&ptno=SPD-BR-1020-SS&template=http://www.spdhardware.com/spdecomm.htm)
Stainless Struts all $32.28 ea. (http://www.spdhardware.com/gs4.htm)

Thanks

[LKSD]

Jamie,
Do you now the center to center measurement on the studs?

Here's some brackets for less than half if they measure up.
Stainless Angle bracket with stud $2.65 ea. (http://www.thomasregister.com/smartcat.cgi?az=72827629&type=details&ptno=SPD-BR-1015-SS&template=http://www.spdhardware.com/spdecomm.htm)
Straight stainless bracket $2.65 ea. (http://www.thomasregister.com/smartcat.cgi?az=72827629&type=details&ptno=SPD-BR-1020-SS&template=http://www.spdhardware.com/spdecomm.htm)
Stainless Struts all $32.28 ea. (http://www.spdhardware.com/gs4.htm)

Thanks

I dont know... I already shipped them out. I didnt think to measure them first.. J

[LKSD]

Ok guys, I had to buy a Classic to get the approximate measurements for you (just kidding But I did just buy her today)... Please note the measurements are approximate from my 18' classic.. I hope it helps as a guideline... Jamie / Lakeside Restorations. com (http://lakesiderestorations.com)

PS: Sorry for the low quality of the pics, but I was kinda excited to get the new aquisition... J

[gcarter]

Jamie, I received mine on Thursday.
Congratulations on the 18!!!! :wavey: :yippie:
Is this your first Donzi?

[LKSD]

Jamie, I received mine on Thursday.
Congratulations on the 18!!!! :wavey: :yippie:
Is this your first Donzi?

Thanks...
It's our first Donzi that my wife & I bought outright, But we have had several Donzi's before that the sole purpose was to sell that we did not own outright..

I have had several personal boats that were mine in the past since I was 16, some include:

14' Baja 120hp suzuki,

19' Century ski fury 440 Chrysler inboard,

25' Scarrab 454 mag/Bravo this was a great boat & one of my favorites before Donzi hooked my wife & I. I bought it at 18. This was the boat that hooked me since the Miami Vice era. I sold it along With my Porsche turbo & Sport bike when I was going to get married because the money had to go elswhere. Im sure everyone who is married knows what I mean. something about Diamonds & business I guess, At least I got to enjoy them for a few years. I guess love & buisness are worth it...LOL )

17' Magnum Tunnel hull#19 150 Seebold Merc SS,

19' Baja 403 Olds / Berkeley,

18' Switzercraft 150 merc (I just got this one recently & it needs to be restored),

1966 Mahogany Chris craft Holiday 327cid inboard,

14' Mini hawk 35 merc,

23' Century cruiser 350/alpha

And everyones favorite a 12' Sea Nymph 8hp Johnson which I inherited last year from my uncle's estate who I used to fish with growing up, and is now my shops utility boat...

Now Im down to the classic, the Switzer, A happy wife, family dog, house, solid business & playing the waiting game to have a baby (we need child labor so I can go boating...just kidding,) & somewhere between a 26 & 33ZX to add to the stable.... Jamie & Kristin :hyper:

[Lenny]

Jamie and Kristin,.. very cool , best wishes. :yes:

:)

[LKSD]

Jamie and Kristin,.. very cool , best wishes. :yes:

:)

Thanks Lenny.... & I will keep you posted on your hatch parts... Jamie :wavey:

[Brian Main]

To whomever may be interested in the hatch Bling bling from Donzi… Here is the current info.. All stuff takes about 2 weeks or so to get to you once ordered.. If interested please call me to place your order by credit card.. Thanks… Jamie / Lakeside Restorations 570-639-2628 :yippie:

Stud plate for hatch strut brackets $49.10 per set

Upper hatch & lower strut mounts for both sets $28.63

Gas struts $98.94 per set

Please contact us for the appropriate shipping for what you would like to order. I had to pull the shipping prices as I just recieved my actual invoices & need to make the proper shipping adjustments per order... sorry for any confusion with the shipping... 570-639-2628 :moped:

Fyi : once Donzi stops using a certain part on their boat lines it is discontinued from their inventory & is no longer available. However if you find yourself in need of a part like that I have access to countless aftermarket & OEM suppliers & can usually get what you need, just not always.. Also please remember us for your Mercruiser & Volvo-penta needs, as I have a huge DISCOUNTED online microfiche available to the public.. Thanks & enjoy the boating… Jamie & Kristin Lakeside Restorations . com (http://www.lakesiderestorations.com) :boat:

Hi,

Is it too late to get in on this deal? I would like one set of both the stud and strut brackets.

Brian.

[LKSD]

Hi,

Is it too late to get in on this deal? I would like one set of both the stud and strut brackets.

Brian.

sure, Just call me & I can order a set for you... Jamie 570-639-2628