PDA

View Full Version : question



Knot Slow
04-15-2005, 11:27 AM
does anybody know ,i just recevied my title to my donzi ,i was told its a 22 classic but the title reads 20"6 is there such a boat ? or is it an error on the title ?also to measure the boat ,what is the proper way,this is a 1986 with a 5.7 merc,i just took apart the lower end changed all the bushings ,the shaft bearing,2 u joints ,went on sea trial yesterday off ft laud beach ,water was like glass at about 65mph.

RedDog
04-15-2005, 11:36 AM
The 22 Classic is 22'-6".

Post a picture and you'll get a quick confirmation.

HamrenDan
04-15-2005, 11:37 AM
Supposedly the Z-22 that i am buying says 22.5 on the CA title..

MOP
04-15-2005, 11:37 AM
EDIT!!! Could it be a new found MINX???

From the Donzi Marine site!

L O A 22’6” (6.86m)
BEAM 7’0” (3.13m)
DRAFT, DOWN 31” (0.79m)
UP 16” (0.41m)
DEADRISE 24°
FUEL CAP 52 gal (196.8L)
WEIGHT (appr) 3,400 lbs (1542kg)
MAX HP 425 (223.71 kw)
BRIDGE CLEARANCE 28” (.71m)

65 had to be on speedo not GPS unless modified, I have the same boat. It had Gil headers and ran very well from what other owners of the same SB 22's told me. On a cool 1000K Island morning and just the right chop 61.9 GPS, it is as I type being experimented with some new and old parts. The results of my experiment remain to be seen!

Phil