PDA

View Full Version : 1988 Z-33 Project - Open to offers / trades !!!



TEAMPSI
03-22-2005, 08:24 PM
Hello everyone and how are you. Your looking at a 1988 Z-33 project.. open to all offers and/or trades. I would like to get around 9K for the boat. Just checked the NADA value online and it is around 40K... plus, you don't see to many of these anymore. Can provide the hull ID if needed....

Clean title in hand...

Couple items to note:

>> There is no power with this boat - You will need, drives, transoms, and motors.
>> The Interior need to be recovered - Same deal with my current project... most all of them need TLC on the interior.
>> The hull is in GREAT SHAPE!! Cleaner then the hull on my other boat. The Teal is faded and would need some attention... but the structure is very nice. We did not drill through the stringers... but tapped them with a hard rubber mallet... very strong.... built like a tank!
>> No trailer is included in the above price... but a new aluminum triple can be purchase for around 3K.

This would be a great project for someone at a great price... Trades are also welcome... but cash is always king :)

Thanks again everyone and let me know what you think!

quint@teampsi.com

Q

http://i21.ebayimg.com/01/i/03/7c/0a/b9_1_b.JPG

http://i24.ebayimg.com/02/i/03/7c/6c/b9_1_b.JPG

http://i12.ebayimg.com/02/i/03/7c/5d/ed_1_b.JPG

http://i18.ebayimg.com/01/i/03/7c/32/c1_1_b.JPG

http://i13.ebayimg.com/02/i/03/7c/80/41_1_b.JPG

jdsdls
03-24-2005, 10:42 AM
Is it set up for Bravos or TRS

Fish boy
03-24-2005, 10:55 AM
Is it set up for Bravos or TRS

I am pretty sure they came from the factory with TRS drives.

TEAMPSI
03-25-2005, 07:00 AM
I am pretty sure they came from the factory with TRS drives.

Hello Everyone and how are you - If I remember right... These were the drive options:

Alpha/300hp Mag option for a short time
Two different TRS drive options (two different motors)
And one surface drive option

I just shot an e-mail out to the guy I bought it off of... he would probablay know the engine and drive combo that came in this Z-33 originally.

I will keep you posted

Also, I have a complete Bravo HD drive set up for sale in the "parts" section... Blackhawk drives, Hill Props, and HD Bravo Gimbles... would look nice on this boat...

P.S. The Hull ID is DMRZE155E888

Donzigo
03-26-2005, 08:09 AM
TRS drives were good drives.

The Blackhawk drives would change the performance of this vessel, for sure.

Good luck.

TEAMPSI
04-07-2005, 08:35 AM
TRS drives were good drives.

The Blackhawk drives would change the performance of this vessel, for sure.

Good luck.

Yes, sounds good. I will be picking up this boat on the 15th... only one week away. It is up North and I have a pretty good drive ahead of me.

I will post better pictures when I get it down here....

thanks

Q