Shift Interupt

[Kirk]

I have a 74 Ski Sporter with a 350sbc. The ignition is complete MSD i.e. distributor, rev. limiter, control box. I have a morse shifter & controls with a volvo 270 drive.

Got a question...can I use MSD's shifter interupt module to take the strain off the drive when engaging either forward or reverse. It's not EFI rather a carbed model if that matters.

Thanks in advance for the help!

KJ

[MOP]

Kirk the big thing with the Volvos is setting up the throttle linkage properly like the factory meant it to be. If you take a look at a stock setup the throttle connetor at the carb is drilled to allow the cable to slide a little ways before it picks up the carb, this allows the drive to engage before any throttle is applied making the shift very soft. Most people attach the cable with a direct pivot which makes the drive slam into gear.

Phil