Getting Stickers off???????

[apollo24]

Any info on how to get the old Donzi sticker and residue/backing off easily?

Also, I have the white and black Donzi replacements, but my X18 came with gold single letters which look sharp. Any suggestions?

[Rodger]

Any info on how to get the old Donzi sticker and residue/backing off easily?

Also, I have the white and black Donzi replacements, but my X18 came with gold single letters which look sharp. Any suggestions?


Use a heat gun. Basically, you heat the sticker and then peel it off. You probably will have to experiment a little to get the techique just right. I've done it this way several times. A hair dryer may work, but I've never tried it. Don't know if it is hot enough.

[Donzigo]

....and WD40 will probably take the gu gu stickum off.

[DonziDave]

I use "Goof Off" to remove my expired vinyl registration stickers. It's an adhesive remover that does a good job on a variety of stickum. Comes in a yellow lighter fluid type can and is available at most hardware stores.
Dave

[Speed-Racer]

Yup heat gun it is....

[MOP]

All of the above great tips, I will add a bit! Be a little careful with the heat gun, use it at an angle and do not get the gel coat to hot. I have been lucky but I have seen several guys bubble the gel coat. After removing the glue with what ever it is a good idea to wipe the area with Acetone to remove any residue before applying the new stickers.

Phil

[Footloose]

I've had good luck with "Goobegone"

[mattyboy]

talk dirty to them :eek: :tongue: :rlol:

[p729lws]

If you're still looking at getting the gel buffed my guy can do the sticker replacement at the same time. Johnny at Angler Marine, 850-436-4007. Give me a call if you come over.
Dan