PDA

View Full Version : Chevy to Volvo Bellhousing For Sale


BRIAN73
02-25-2005, 01:25 PM
Hello Everyone:

I recently bought a chevy to volvo bellhousing from forrest on this site.

As my luck would have it, it's slightly different than what I need (DARN IT).

So I'm offering it up for sale.

Email me if anyone is interested.

englert@troybelting.com
Kirk
02-25-2005, 03:20 PM
Brian,

nguber57 is looking for a bellhousing. In fact he inquired about it after you bought it from Forrest.

Good Luck!!

KJ
nguber57
02-26-2005, 10:07 PM
hey brian73 i an interested in the housing It is the housing from the block to the transom assy.It holds the shaft and the bearings. thanks
BRIAN73
02-28-2005, 08:01 PM
nguber57

This unit is a chevy V8 Bellhousing with the intermediate housing attached.
The intermediate couples the bellhousing to the input shaft of the outdrive, yes it contains bearings and seals.

Let me know if I can answer any more questions

Brian
nguber57
03-02-2005, 11:03 PM
hi Brian 73,how much are you asking
BRIAN73
03-03-2005, 09:36 AM
nguber57,

I paid forrest 65.00 +shipping
I would kind of like to get that as well.

email me if your interested
These set ups are getting very difficult to find.
englert@troybelting
nguber57
03-04-2005, 10:34 PM
Brian is this two seperate parts that are bolted together.Is the shaft that goes through the housing course or fine spline thanks
BRIAN73
03-07-2005, 09:08 AM
nguber57,

This is only one piece. The intermediate and bellhousing are one. The shaft fits a standard triangle shaped volvo flex plate that mounts to the flywheel.


Brian
nguber57
03-07-2005, 07:39 PM
Brian73 iI will take it for 65.00 let me know how i can get the money to you. You should be nice and take care of the shipping if not let me know how much it is.address is 7 Cliffwood road. Baltimore Md. 21206 Thanks
Mr X
03-08-2005, 08:14 AM
If you he does not want to pay the shipping....I will :smile:
BRIAN73
03-08-2005, 12:05 PM
NGUBER57,

I would like to be nice, but I had to pay shipping to get it, so it's only fair to charge you.

Email me at my work address and we will work out the details.

englert@troybelting.com
nguber57
03-09-2005, 08:01 PM
Brian73 thanks it will be taken care of tomorrow
nguber57
03-19-2005, 08:25 PM
Brian73 thanks recieved the part today.