View Full Version : 18 classic tachometer
slownsx
01-10-2005, 07:33 PM
Ive had my first Donzi for about a month now and noticed the factory tach seems to work less accurate every time out. Is there any repair methods or just have to get a new one? Any suggestions would help.
Trueser
01-10-2005, 07:41 PM
Check your grounds and connections. I found my wires were smashed between the bulkhead.
Good Luck
Another thing to try, look at the back of the tach there is a screw to set the tach for 4,6,8 cylinders. The contact tips are just copper wipers they get musty over time. Take a small screw driver and gently turn it back and forth a few times between the setting posititions, I have brought a fair amount of them back to life doing that. And like Trueser said check the connections, us salt guys do have a few more wiring/connection probs than the fresh water guys.
Phil
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.