PDA

View Full Version : Trailer For Classic



Dr. Dan
12-27-2004, 09:30 PM
:spongebob I am listing my Trailer for my 22 Classic, it is a 1992 Steel Open Channel Rail, with closed square tube cross members, it has been rebuilt with 4 Drum Brakes, all new Tires in August of 2004(Bias Ply- C Rated ST Sidewalls), I will be beefing up the Cross Members with plate stock to add rigidity and cut out and replace all rusted areas where applicable.

The Brake lines and Brakes were all replaced in Spring 2003, all Wheels and Spares match and are Brite Polished.

This Trailer will make a great Replacement for someone who needs to update...to a Tandem unit, or someone who wants to transport from the lift to the Homestead after the Season is over....the Bunks are adjustable to angle to the Hull....

I have trailered over 50,000 miles with this Rig....since I have owned the Donzi...(2002), reason for replacement is to upgrade to a lighter and more State of the Art Unit to be in keeping with the Rebuilt Classic it is hauling all over the Country! :beer:

I am looking for $1300.00 or Best Offer.....and I need to move it by March or April at the latest! I can arrange Transportation within reason....along the Eastern Seaboard or even Michigan/MidWest area. Call my Cell during the Day to discuss any questions...717-512-3656....

Doc :beer:

Brian Freeman
12-28-2004, 08:36 AM
What is the weight capacity of the trailer? Can a get a 24 El pescador on there?

Dr. Dan
12-28-2004, 10:47 AM
:spongebob The Max Load Plate says 5000 lbs....ours with fuel and gear is pushing 4000 lbs on the Trailer. I would guess it would haul it but you would wanna consider adding longer bunks to supprt the Transom if there was too much over hang? :beer:

Doc :spongebob

Brian Freeman
12-28-2004, 11:09 AM
do you know what length it will handle like 22-24ft or 24-26ft. Does the plate have any info on length capacity??

Dr. Dan
12-28-2004, 06:38 PM
Brian ...I just checked the Plate and it says nothing regarding length....I know my boat is technically 22'8" long, and I know you can reposition the Bow Stop further forward if ya had to...or change it out to accomadate your actual Bow as it sets against it! Here is a shot of my boat on it...hope this helps...

Doc ;)

Ernie Gibson
12-31-2004, 10:02 AM
That trailer (MTI ) is made about 3 miles from where I live. Just checked into having one like it made....$2800. $1300 is a deal...wish I needed one! Will make someone a great trailer.

Ernie Gibson
12-31-2004, 10:05 AM
You can call Jack Keller 770-945-0103 at MTI trailers and he can tell you if it will fit. He knows about every boat you can imagine. Nice guy too. Good luck.

Dr. Dan
01-16-2005, 08:45 AM
;) Ttt

TREYSTJOHN
01-18-2005, 05:30 PM
One of my guys is very interested, we need to know the overall length from tongue to rear edge of bunks and from bow bumper to rear edge of bunks. He needs to be able to fit a 24" Switzer with twin 2.5s on it. Shop number is 410-761-1337 (Glen Burnie, MD)


Thanks, Trey

Dr. Dan
01-19-2005, 12:04 PM
:wavey: Tres...I am out of town for a few days...when I get back I will take measurements for you...I also have a line on another 22 Classic Eagle Trailer.......Same Price Point...

Talk Soon

Doc :smash: