View Full Version : Donzi/Kaama Help!
Woodsy
09-15-2004, 07:16 PM
Hey Guys!
A buddy of mine has a 87 Z-33 Crossbow with a pair of Kaama's on it. TO make a long story short he lost a u-joint and in the process took out the transom plate? Anyway, I guess he needs to locate one. Any ideas?
Woodsy Von Outboard
Donzigo
09-15-2004, 07:32 PM
Woodsy,
I don't know where you can find the part; but, I'm pretty sure that boat with KAAMA drives was the showboat at the Chicago boat show, for Donzi Marine, that year.
His best bet is to contact Archer Marine in California. I'm sure it's NLA, but they may have a line on a used one.
Lenny
09-16-2004, 09:35 AM
Woodsy, give these guys a call. They are in Vancouver and are the "surface drive" used/new distributor for Canada.
http://www.pacificsurfacedrivesinc.com/
He buys used parts from all over the world. Owners name is Ken.
jdsdls
09-17-2004, 07:37 AM
Have him look up a guy called Cuda on this site. He has a set in his Formula and is always very helpful.
PS: is the boat yellow it if so it used to be down here is Connecticut for awhile.
Probably the best bet if you can't find a used one is to try to have the old one repaired.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.