PDA

View Full Version : Geoo, a couple of Arneson questions



Lenny
09-14-2004, 05:42 PM
I found this place

http://www.pacificsurfacedrivesinc.com/used%20drives.htm

locally here ( Vancouver) and he says he is "the only Arneson Dealer" in Canada. Who knows. He does not sell the Bravo to Arny kit, he said I would have to deal with Rik if I wanted something like that. Anyways, he sells used drives, and gets many all the time. He has 4 coming in next week from the West Indies (ASD6's) and they will be going out the door at about $3500 US complete. (he has both the 1721 and the Bronze ones)

Anyways, what size wheel are you spinning, he recommended the 16x22 to me, and what is your drive ratio? He recommends 1.33 for a light boat.

I am sure you know the real answers here.

Thanx in advance.

GEOO
10-11-2004, 02:16 PM
Lenny,
Sorry it took so long to get back.
I run a 1.33 gear unit. 1721 and a 14 x 25 rolla four blade.
Most props are made in the 16" dia and are cut down.
The three blade vibrated a lot on my boat.
Make sure you have both rams. They cost $ 1,000.00 or more each to buy. You can call me if you have any question (203)258-5222 or write back