Boat yard sale

[Wildfire]

24' Aluminum fast load trailer. Rarely used 2001 model. Excellent condition $3,750 Comes with free 1972 Magnum 25 project boat

Complete Bennet trim tab system - single ram $250

Teak swim platform with brackets Its the 6' 6" version OK shape, I wouldn't put it on a Donzi, but you may have a dive/fishing boat $200

Volvo 275 with power trim - Not sure of the model, its the one with the elephant ears on the trim piece. It has been sandblasted and primed with etching primer. Complete from bellhousing to prop UPDATE: Serial number starts with 271 and ends with a B $500

Arneson drive for rebuild SOLD

SBC - O'Reilly's rebuild with low hours - Not sure if it is marine or not. Complete package. $500

BBC - Gen V - Dissassembled into major components - Appears to be in good condtion - Complete with front brackets $750

Exhaust manifolds for SBC $50

Holley marine carb - 750cfm (I think) - electric choke with electric fuel pump - Excellent condition $175

Alpha bellhousing $25

Old Morse control and cables $25 (again, fish boat quality - no offense Jefe)

New 200 amp meter base with disconnect - $125 (Not a boat part, but you never know...)

ALL PRICES open to negotiation. In other words, I want my shop back and this stuff has got to go!!! I'll try to get some pics posted this week. There will probably be some other parts come up as I sort through the shop this week.

479-795-1740 in the PM

[Forrest]

Any pictures of the trailer and "free" Magnum?

[pmreed]

Forrest, I think it's probably This One (http://www.donzi.net/forums/showthread.php?t=33829)

Phil

[Lenny]

Scot, I want the Arneson. Pics please. Thanx, Lenny

p.s. I did a search under your old posts and I see how you aquired it. My concern is that you sell it with the trim rams/steering. Is this the case? I will send it out to Howard in Calif and get it rebuilt but I want most of it there. Thanx

PM me if you like or call collect. 250.474.4005

[Wildfire]

Lenny, you have email and I will try to call later this evening. I'm going out to the shop in a minute and will refresh my memory on the drive.

Forrest, Phil called it. It is that Magnum.

Thanks for looking...

[Lenny]

Scott, I should wait a bit here. Next week the owner of this place, Ken, http://www.pacificsurfacedrivesinc.com/used%20drives.htm is getting in 4 more ASD6's (used) and they are going out the door at $3500. Complete. This fella is also about 50 miles from me (and 18 miles of water) Talk to Ed as I don't want to hold you up. I just have to wait and see what this fella has cuz they are complete, and I don't have to buy the trim and steering rams either. I also get to choose whatever gear set I want. 1-1, 1.33-1, 1.54-1. It "looks" like a good deal.