1969 Barrelback on ebay $10K

[Lenny]

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=2488168302&category=31270

I don't think it is a '69 mind you, maybe a '67, otherwise earlier. Buy it now at $10K

[Tony]

'67's had two vents, didn't they?

[Formula Jr]

Those are original vents. Not the new perko crap you see all the time.

[Lenny]

Big lift rings, donzi script down side, but certainly updated in many areas. I thought barrelbacks were last produced in '67.

[JWCall]

I've got a 68 barrelback. As far as I know they were last produced in 68, but It's possible that this one was a left over and then sold in 69. It would help to get the hull #. It has to be after mine which is c18-225, seeing as mine is a 68. Hope this helps.

[Donzi Racer]

where would you find the hull #? On the x-18 it was behind the back seat cushion. would the serial # of the boat have it in that? like SLZK2307H869?
thanks, Tom

[Emmo]

My 18 barrel back was titled as a 1970. According to one of the Chisolm brothers, it was probably at the lake house of a Donzi exec for a couple of years and then sold as a demo. The original motor was cast in 1967. Hull number C18215 is on a foil sticker behind the rear seatback and written in magic marker under the deck and behind the dash.

[DAULEY]

whats it worth ?
has bubbles in the deck gel

[Donzi Racer]

this barrel back donzi hull # is c 18 217 which may make since that it is a 69' model. that is what the title says anyway. hmmm, Tom

[Donzi Racer]

whats it worth ?
has bubbles in the deck gelGot to see it today. what is it worth? Let's see, a solid classic barrel back hull 3k -5k, newer interior, 1.5k -2k, new bravo drive with 2 lower drives, 5k-10k, Dart heads 2k, holly carb, 400, high rev intake 250, aluminum exhaust manifolds, 2k, guages,hardware, acc. 1k, nice trailer, 1k, = a bargain. oh yea there is a high rev motor in there somewhere. it's got to be worth something. Seriously saw a older survey on it for 28,000 replacement cost, probably double that for a new 18 today. It definately needs the deck gell coated though. what would that normally cost? Tom