David Ochs
08-22-2004, 09:07 PM
My fuel gauge is stuck on the 1/2 mark. So here's what I've done:
Checked the voltage from sender with tank 8 gallons down, read 5.35. Checked again with full tank, voltage now reads 7.75 volts.
I assume from this that the gauge is probably the culprit, provided that 7.75 volts is proper with a full tank.
I sure don't want to have to pull out the sending unit, doubt that I'll get another one back in with ruining it. Tight squeeze!
Any advice is appreciated, Thanks
Checked the voltage from sender with tank 8 gallons down, read 5.35. Checked again with full tank, voltage now reads 7.75 volts.
I assume from this that the gauge is probably the culprit, provided that 7.75 volts is proper with a full tank.
I sure don't want to have to pull out the sending unit, doubt that I'll get another one back in with ruining it. Tight squeeze!
Any advice is appreciated, Thanks