PDA

View Full Version : Hi-Tek Mfg Ford 302/351w water cooled HEADERS



Moody Blu'
08-16-2004, 11:47 PM
This exhaust system(header type) is the only system availible for less then $5000 for Ford 302/351w marine motors. Complete with replaceable Zinc anodes, fel pro exhaust gaskets and Header bolts. This is a FULL exhaust with no worries about center riser/exhaust manifolds to leak Or leaky block off plates. They are bare stainless with a 3" exhaust outlet (inner diamter) and a 4" outer diameter, for the water. They are pressure tested up to 75 PSI for leaks and are made out of stainless 304. 20-35HP more out of your ford and there garaunteed for 5 years from defects!! This exhaust system will only work with oem style valve covers and header bolts. spacers can be supplied for aftermarket valve covers but need longer bolts(2") to bolt up, studs and nuts wont work.

normally $2000, donzi registry members will be able to buy this set for $1400!!!! if you need adapter pipes they will cost $50 each and are made out of 304 stainless as well. The new ford exhaust that is being made now will cost around 1700. No spacers needed, run any valve cover you want .


Any questions feel free to ask. I will be selling all makes of hi teks so if you need something else please ask.This exhaust is ready to ship.

here are some pictures of the exhaust.

http://www.donzi.net/forums/attachment.php?attachmentid=5028

http://www.donzi.net/forums/attachment.php?attachmentid=5031
here is the outlet
http://www.donzi.net/forums/attachment.php?attachmentid=5032

Moody Blu'
08-17-2004, 06:32 PM
I listed them on ebay I will cancel the auction if someone from the registry wants them.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2487429374

The reason for me selling these is I dont want to use spacers on my exhaust I want a straight bolt on. if someone isnt going to work there motor then these will be a perfect 25-35HP bolt on. Just need to use oem valve covers, or I can send the spacers with them and youll have to get extra long bolts. the studs and nuts wont work because the runners are so big.

I lowered the price for members too.

Forrest
08-18-2004, 09:17 AM
Broque, what's the big deal with using spacers? Seems acceptable to me. I don't see how you could loose any HP with them.

Moody Blu'
08-19-2004, 10:57 PM
If someone doesnt mind using them then they should buy em, I want them without spacers thats all.