PDA

View Full Version : 18 2+3 v drive 427 h&m prop info needed



lee
08-15-2004, 06:58 PM
looking to find out what kind of prop is needed for a 1968 18 2+3 v drive

RedDog
08-15-2004, 08:09 PM
Need to see detailed pictures!

Careful with this crew if you intend to keep it - have you every heard of "scarfing up"

lee
08-16-2004, 10:16 AM
Does Anyone Have A Boat Like Mine Bought With No Prop

boldts
08-16-2004, 12:26 PM
Lee,

Try this member from the Midwest Donzi Club website. If you go to the site, there are pictures linked to the members boat description. I don't know if all Mr. Willett's info is still current, but it's a start for you.

Richy Willett - pwdrcoat@icx.net
3605 Decatur Highway
Kingston, TN 37763
(865) 376-4511
1970 18' Classic - 427 HM with V-Drive

J&K SHAHBAS
08-17-2004, 08:15 AM
I can help but would need to know what the v-drive gears you have,
most from the factory were 15% over and the prop was probably a 13x13 bronze also need the propshaft dia. probably is 1" but on alot of Hornets they were 11/8" I have a 13x18 stainless that came with my V-drive Corsican that you can try when you are ready and for your final prop I would suggest a Menkins but you need to be close to what you need before you order a new prop. Let me know if I can help.

John

lee
08-17-2004, 10:07 AM
will get the size of my shaft and send you the info along with my ratio will take me a few days this boat is still in storage it is my winter project

TuxedoPk
08-17-2004, 05:03 PM
Lee,

I've got a 21GT with Vdrive. It's running a 12" 15p stainless Menkens.

If you are looking for a great prop shop, MOP turned me onto Accurate Propeller in NJ. Speak with Gary the owner at 888-469-7767. Incredible customer service.

Rich