PDA

View Full Version : omc prop



need for speed
05-30-2004, 02:43 PM
Hey
Ran the 22 today ,ran great AGAIN ;)
I am running a 23p turbo prop , I Also have the 21p that came with the boat.. With the 23 turbo trim all the way and tabs up about 3800 to 3900 out of her on my tack. Should get from 42 to 46 I think ... What should I do go back to the 21p or Have a little pitch taken out of the turbo?

454 omc / king drive

need for speed
06-01-2004, 04:43 PM
Any idea will help

Dr. Dan
06-01-2004, 04:52 PM
:cool!: Charles....we ranged 4200 to 4400 when everything was dialed in...I never saw above 4400....in fact, we rarely even broke into 4000 RPM's or more...mostly due to conditions we regularly boat in...not because it couldn't get there!

If I were you....I would pick up a 22 Turbo.....and see if that doesn't get ya where ya wanna be....we ran the 23 Turbo the entire time we had the Stock Set UP....

We are going to a 25 Turbo for a new baseline...and see where it goes from there.

:cool!: Doc

need for speed
06-02-2004, 07:28 AM
Thanks DOC :yes:

Dr. Dan
06-02-2004, 09:30 AM
Charlie I use this guy for buying my Turbos....very reasonable,

ask for Dan. www.dansdiscountprops.com

I just ordered a 25 Turbo for my collection and its only $306 delivered to Pa.

He normally answers the phone...

Good Luck

Doc :cool:

need for speed
06-02-2004, 02:08 PM
Yeah that is the place where I got my last prop.p23 . Really nice people... :yes: