TuxedoPk
05-18-2004, 07:33 PM
The propeller drive shaft bearing on my GT needs to be replaced- there is quite a bit of play when you move the prop.
I believe the shaft is 1" and a 1.25" bearing from when the prior owner had a 750hp blown engine in the boat with a 1.25" shaft is installed.
The marina where I have the boat said they couldn't get a replacement bearing for several days- not much help when I wanted to have the boat at AOTH.
Does anyone going to AOTH have the tool to pull the existing bearing and have 1" and 1 1/4" bearings (Sorry I'm been told conflicting stories about what I need) that they could help me install.
Please give me a call at 201-669-7175
Rich
I believe the shaft is 1" and a 1.25" bearing from when the prior owner had a 750hp blown engine in the boat with a 1.25" shaft is installed.
The marina where I have the boat said they couldn't get a replacement bearing for several days- not much help when I wanted to have the boat at AOTH.
Does anyone going to AOTH have the tool to pull the existing bearing and have 1" and 1 1/4" bearings (Sorry I'm been told conflicting stories about what I need) that they could help me install.
Please give me a call at 201-669-7175
Rich