New Engine

[RickR]

New engine is installed and running :hyper:
Can't wait for AOTH!!!!
Started with new Gen VI 502 GM Block decked to .005 "in the hole", 30 lb bypass valve
Forged GM Crank
Dimple GM Rods
SRP Pistons
9.4/1 compression
GM Retangular port heads milled .035 w/bronze inserts, teflon seals and 5 angle valve job
Crane 169611(HP 500 Cam) 222/230 @ .050 .576/.598 lift retarded 3 degrees (intake lobe centerline 108 ATDC) maximum intake lift at 111 degrees
800CFM/4150 Holley w/mechanical secondaries
Dart Intake
Gil Mag Choice exhaust
MSD Ignition and Distributor

THANKS that helped bring my project togeather. especially
Risky Skunk Works (Papa Skunk, Stinker and Stinky)
Madpoodle
GEOO
CDMA
Too Old

[GEOO]

Rick,
Looks great. Hum, nice cr.... She should make some power. Must sound great too.

[Greg K]

Nice and Clean Job!!..look forward to seeing it at Cumberland.