volvo drives and parts

[BZmarine]

i have 2 complete drives for sale. one is a 270 $700.00 and one is a 250 with a nose cone on it $750.00. i have gimbles, bellhousings, a nose cone fits 250-270 $50.00, water pump housings, flex plates, also one lower case for a 250 with shafts and bearings $100.00. all never hit bottem, no cracks or leaks. i can send pictures also. email or give me a call 540-849-0953 thank you Brian

[BZmarine]

update, the 270 is sold. the 250 with the nose cone is still for sale. it is a nice unit still on the boat. all painted and ready to go. oil changed 3 times a year. droping price to 550.00. give me a call or email if you need other parts. also the lower case after closer look i see that the fins on the intake for the water are broken out and glassed up. it had the spair nose cone on it. and the water was not used. i will sell it for 25.00. the shalts are fine its just the water intake. thanks for looking.

[BZmarine]

update 2, the lower case is sold and the nose cone is sold. i have left 1 complet working 250 drive with a nose cone on it. also will get gimble and the electric tilt motor. i want to sell it as one unit. drive and gimble and all tilt motor parts.. it is long shaft with tapped locking hole. it does not leak or never hit anything. great for doing a resto. will sell for 800.00. cant beet the price even for a spair. if you need pic`s email me. thanks brian

[BZmarine]

update 2, the lower case is sold and the nose cone is sold. i have left 1 complet working 250 drive with a nose cone on it. also will get gimble and the electric tilt motor. i want to sell it as one unit. drive and gimble and all tilt motor parts.. it is long shaft with tapped locking hole. it does not leak or never hit anything. great for doing a resto. will sell for 800.00. cant beet the price even for a spair. if you need pic`s email me. thanks brian P.S will go on ebay in one week.

[mattyboy]

Brian,
you have mail!


Matty

[kjly63]

Looked at Matty's upper housing this A.M. He's got some teeth missing on the upper gears :banghead: . But I think he is determined to make the Lake George trip :yes: .
Question: Where are the gear ratio's different for the 4,6 & 8 cylinder drives? Are the upper gears and lower different on each? or is at least one part of the drive that's always the same? :confused:

I know these Volvo drives are like Maytags; but sooner or later you'll need the repairman.

Kenny

[Lenny]

4, 6 and 8 have the same gearset up top. The lowers (where vertical meets horizontal are the parts that are different.

http://www.donzi.net/forums/attachment.php?attachmentid=3497&stc

1:32 or something V-8, 1:61 V-8, then 1:86 6cyl, then 2:15 4 cyl.

[kjly63]

Thanks Lenny, Matty and I will try an easy test to see how many turns at the prop per revolution. Sure glad I asked before buying larger pitched props to try. I was told it was from a v8 powered boat; but who really knows.....bought it on ebay.

Kenny

[BZmarine]

update 3. yes lenny is right. v/8 ratio is 1.61:1. all the drives are sold. all i have left is a 302-351 bellhousing h/m, 2 raw water pumps, 2 front motor mounts h/m, 1 flex plate, 1 mid section for a 250 ( just the housing ), 2 flywheel covers ( tin betwine the motor and bellhousing ), also have 2 rams for merq alpha. ill keep digging i think there is a few more things. email if you need pic`s. thanks everyone!!!!!!!!!!!!!!!! brian

[just2v]

just wanted to take a long shot and see if you still have the H/M bellhousing that was listed in this post.

donzi@justinh.com