View Full Version : Merc Trim Pump Brackets
RickR
04-25-2004, 12:13 PM
To make trim pump brackets I used a 9.5 x 16.5 piece of .063 aluminum tread plate. Available @ Lowes or your local sheet metal supplier.
Made template out of cardboard then marked and cut (jig saw) :smash:
RickR
04-25-2004, 12:15 PM
Made angles with a vise and reassembled :biggrin:
Air 22
04-25-2004, 01:30 PM
Rick...nice work :yes: Merc sure doesn't prep the original very well. I had my new pump/bracket one season and had to remove sandblast, prime, paint(RED) of course :D Merc just paints over the steel, no primer and it rusts quickly. We'll see how long my project lasts...if not long enough...you have a great idea... :biggrin.: . thanks for sharing... :wink:
gcarter
04-25-2004, 04:57 PM
Nice looking bracket.
Also Brian @ Martini Boat makes some nice brackets in SST. Also available powder coated.
George
Nice looking Bracket. The stock Steel ones rust out in a couple of years.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.