PDA

View Full Version : Mad Poodle needs Help



MOP
03-20-2004, 10:35 AM
Can someone with an X18 measure the exhaust manifold height and post it.

Thanks from MP>

David O
03-20-2004, 12:03 PM
from where to where and what type?

MOP
03-20-2004, 02:26 PM
I need from say a manifold bolt to the top of the riser, reference point for me to check out stuff for him on monday. Its one of those Gee will it fit things.

Phil

David O
03-20-2004, 03:19 PM
OK Phil
Straight edge laid across risers at higest point. 11 1/2 inches to center of bolt head, both sides. Imagine that!! Stainless Marine manifolds and Stainless Marine headers.
Straight edge laid on deck spaning the opening over the highest point of the risers. measurment down to riser, star=1 1/4 inchs, port= 1 1/8 inches
Don't know what you are doing but Poodle has custom header and had to cut the core out from under his hatch to allow for the headers.
hope this helps
David

ITTLFLI
03-20-2004, 03:28 PM
Call me tomorrow if you need help! I have old logs manis though!
Byron
513-470-8480

MOP
03-20-2004, 04:48 PM
Another thanks, will have tape and magnifying glass!

MOP

Mr X
03-20-2004, 08:00 PM
Unless the headers are brand new, I sure would have them pressure tested.

Air 22
03-21-2004, 01:52 PM
Thanks guys. Davids measurements will work.. My X is safely locked away where the building inspecters cant see how many boats I really keep in the yard :EEK: :D


does this include when we visit?? :) Cuz your yard bee the South FL Classic Dealer in Feb... :cistineb: