PDA

View Full Version : 22' Apache



Philip47
03-14-2002, 09:10 PM
Wife's back is in sad shape and boating is not something we can do together :(

22'Apache, 1982 Hull, completeley re powered and rigged
All new interior, Gaffrig gauges, Mercruiser 420 H.P. 454 HO, New Bravo 3 upper, Bravo one lower, with drive shower, Bravo one parts by the Bravo Shop
Gill exhaust
Very clean boat!!!!!!
All parts except hull are new
Pics under Challenger 21 in other performance boats heading, big money spent on this boat completed in 1999 only 70 hrs, have 24K invested would like to see 20K,
http://www.donzi.net/photos/Mvc-001s.jpg

http://donzi.net/photos/Mvc-002s.jpg

http://www.donzi.net/photos/Mvc-003s.jpg

http://www.donzi.net/photos/Mvc-004s.jpg

http://www.donzi.net/photos/Mvc-005s.jpg

http://www.donzi.net/photos/Mvc-007s.jpg

http://www.donzi.net/photos/Mvc-008s.jpg

Philip47
03-17-2002, 11:37 AM
What did I do wrong with the Photos?

MXRoadster
03-17-2002, 09:12 PM
Phillip, you either have the addresses wrong for the photos, or you did not upload them correctly. My guess is they were not uploaded correctly. Check all the steps and try agian.
Good luck,
David

Kent Perroux
03-17-2002, 10:33 PM
Phil, Sorry to hear you can't enjoy it. That is a very nice boat.

harbormaster
03-18-2002, 02:49 PM
Philip,
Have photos of the cockpit and dash??

Philip47
03-19-2002, 06:36 AM
Will photo and post this weekend

seano
03-19-2002, 02:44 PM
philip,

sorry to hear about your wife. best of luck to you both.

sean

ripbod2
03-26-2002, 07:58 PM
Sorry 'bout your wifes back.I'm curious,what is the deadrise on the hull?
Rip.

Philip47
03-31-2002, 09:31 AM
16 degree dead rise, waiting for a nice day for interior pics

Sagbay32
05-18-2002, 12:48 PM
Sorry to hear it.
That looks like a beautiful boat. I love the lines.

murdock
05-20-2002, 10:29 PM
Dear Phil,
Due to the unfortunate situation, what type of offer would you be looking for at this time?
I don't mind the challenge if I don't get buried in it.
Please call me at 1-800-453-7465 days or 513-232-1173 at night to talk it over.
All the best,
Bob Murdock

Philip47
05-22-2002, 04:29 PM
I downloaded interior and dash pics but they did not post, but you can view by clicking hyperlink below the posted pics.

Philip47
09-27-2002, 08:01 PM
Well the wifey's back isn't any better and my wallet is light but at last the engine is back, posted as 461 cu. in. Dyno specs take a look, 461 cubes 490 HP i'm very pleased, now i need hydrolic steering and a diff prop, but engine will ship Monday, I've been off the water for a LONG time, lucky we boat year round down here!!!!

Philip47
09-27-2002, 08:09 PM
461 cu. in, Gen IV 454 4 bolt mains
Fully machined, Bal & Blu
Eagle H beam rods & Forged Crank
Comp Cams Hyd Roller Cam, Rev kit & Rockers
Forged Pistons 10:25 pistons,
Stainless & Inconel valves
750 DP mech sec, 71 & 77 jets
Stock Rectangular Port Heads,
Dual Plane Manifold
MSD ignition
ATI Balancer
Gill Exhaust
Dyno'd #s with Accessories

RPM LBS TQ HP
3500 498.3 332.8
4000 499.7 388.3
4200 497.4 412.9
4500 486.5 416.8
4700 484.6 433.7
4900 487.0 454.4
5200 473.5 468.6
5400 469.5 477.1
5600 464.0 478.2
5800 451.1 490.0

I didn't post numbers at ever 100 RPM incremant, but this gives you a good representaion

Without Accessories made 496.4 HP & 453.1 lb TQ @ 5,800 RPM

I am very pleased, holds a nice TQ curve with good HP, this is a pretty mild motor and looks like it makes very good power. I plan to turn it in the 5,400 - 5,600 RPM range

I also sent them a new 830 Marine Holley and to my suprise the 750 made better numbers.

Built & Dyno'd By Bruce Baker of Express Engines dyno'd at Keith Eikerts Facility

Eugene Nahemow
10-03-2002, 07:44 PM
Phil,
Are you planning on keeping the boat now or is it still on the market?
I might know of someone who might be interested.

Regards,
Eugene

Sagbay32
10-03-2002, 08:17 PM
Is that a Scout?

Mike in White Lake

Philip47
10-12-2002, 06:18 PM
Yes still on the market Eugene, and no it is not a Scout Sagbay, there where quite a few of those made, there were about 12 of this Challenger style hull made.

Sagbay32
10-12-2002, 09:14 PM
Philip,
I wish we lived closer to you. I would love to see your boat, as I too am in the market for a new boat.

Mike in White Lake

harbormaster
10-12-2002, 10:35 PM
http://www.donzi.net/photos/Mvc-009s.jpg

DAULEY
10-21-2002, 07:26 PM
WHATS IT TAKE TO BUY IT PLEASE LET ME KNOW
THANKS