PDA

View Full Version : OMC Exhaust Riser Needed (GeneD/RickR/Forest??)



Donziflyer
06-07-2000, 05:01 PM
Needed ASAP: Right side exhaust riser for 89 OMC 330HP 460 King Cobra (used prefered or lead on where I can get a great price on new). Part #: 913584

Where's the hot price source on-line for exhaust tube and OMC control cables?

HELP GUYS!!!

------------------
PaulH

GeneD
06-08-2000, 07:05 AM
Sorry dude,
I don't have anything laying around for a BB. As far as getting something new, do a search on the net for OMC parts. There are plenty of discount places out there.
Think about getting two risers, you know?

------------------
GeneD
007
Melbourne, Florida

[This message has been edited by GeneD (edited 06-08-2000).]

Donziflyer
06-08-2000, 02:22 PM
Thanks for the response Gene. I did find a few decent sources on-line prior to requesting help on this but considering my lack of experience in part hunting for my new fetish I didn't want to leave any stones unturned. At this point I have decided to remove both exhaust manifolds, glass bead the water jackets as clean as possible and repaint. Replace both risers and tubes (with new). Since our Donzi was used in salt water prior to my owning it I feel that this would be a good time to remove the soft plugs and clean the water jackets in the block of as much sediment as possible also. Maybe a surprise lay-off from work wouldn't be all that bad right now http://206.150.187.82/ubb/wink.gif since I've already used up all my "weekend time working on the Donzi" according to my very tolerant and supportive wife (Tami). http://206.150.187.82/ubb/biggrin.gif

------------------
PaulH

[This message has been edited by Donziflyer (edited 06-08-2000).]