PDA

View Full Version : Need Volvo 6 Bolt Bell Housing



Jasonbighands
11-25-2003, 02:03 PM
I need a 6 bolt volvo bell housing that will work with the older volvo drives. It is for a ford small block. I have a 5 bolt with a 260 block. The 260 is already bored 40 over. I'm going to get a newer ford block, but they are all 6 bolt. Can anybody help me?

turbo2256
11-26-2003, 01:26 PM
I have a stock bore 260 from a Donzi Intercepter and all asso parts interestred will be back monday

RT
11-27-2003, 05:00 PM
I have bellhousing, steel timing cover, pump,
manifolds, risers, etc. from a 302, freshwater motor, from near you, Wabash, IN. email me with needs.

Ralph Savarese
11-30-2003, 05:36 PM
I have a volvo 6 bolt bell housing if needed also 4 barrel cast iron intake small block ford!

Jasonbighands
12-02-2003, 04:29 PM
I think I have found what I need on the bell housing stuff. If not, I'll let everybody know.

Jasonbighands
12-05-2003, 02:53 AM
Ok,

I thought I nailed one down, but it fell through. Hey Ralph, is yours still available???

Jasonbighands
12-08-2003, 01:54 PM
Help,

I still need a bell housing. Jason

Ralph Savarese
12-08-2003, 04:04 PM
Yes it is let me know!

Jasonbighands
12-09-2003, 01:07 AM
Ralph,

I'll call you or you call me. Check you e-mail.

Jason

Jasonbighands
12-14-2003, 03:12 AM
Help everybody, I have not heard from Ralph, andI still need a bell housing. I know you'all are probably tired of me, but I need one soooo bad.

Greg
12-14-2003, 09:10 AM
Jason, I am pretty sure I still have my old bell housing in the garage. It's off a '66 289 that was in my old 18'. We're having holiday company this aft. so If I can't get to it today I will definately get back to you by this time tomorrow. I know I still have the Intercepter manifolds and some other sbf stuff.

Greg
12-14-2003, 09:46 AM
Couldn't stand it, curiosity got the better of me, I had to know. Went out to the garage and yes, I do have the old bell housing off my 289. If the 6 bolts you are refering to are the ones that hold the intermediate housing. It was used on a 200 Volvo drive. I don't want to run over top of Ralph, but if things don't work out let me know.

Jasonbighands
12-14-2003, 04:58 PM
Greg,

I think that will work. Are all the old volvo drives interchangable? I have a 280 on mine right now.

Ralph Savarese
12-16-2003, 09:58 AM
Jason Call me 631-277-4821 after 6:30 pm