Looking for a couple parts

[Cuda]

I'm looking for a flame arrestor and an engine coupler for the Minx if anyone has one.

[Rootsy]

the engine coupler that bolts directly to the flywheel mounting bolts? (later models bolt to 3 tapped holes in outboard of the flywheel). i have one that mounts to the flywheel mounting studs (260 merc type) that i believe to the best of my knowledge is mechanically sound.

i also have a flame arrester or two lying around somewhere i believe...

fire me some mail or give me a call... i can give you a definite answer on whether i have them yet or not in a week or so when i get to the shop again.

Root

jaroot@tdi.net
734 755 6013

[Cuda]

I'm not sure which coupler it is. I'll stop by my dad's today and see if I can tell by looking at the flywheel. It's an 87 if that helps.

[farmer tx]

Cuda, Is this what you are looking for? It came out of my 86 22 classic with a 454 and Alpha drive. It is in good shape and was replaced because I had the engine out for some mod's. It has about 325 hrs. on it.

http://www.donzi.net/photos/Ruidoso046.jpg

Mark

[Jamesbon]

Joe,
I have a nice Barbron flame arrestor that fits Q-Jet & Holley with 5 1/8 neck. $25. It measures 6.6" across, and has 2" high screen. Looks to be gold anodized and in great shape. My local # is 458 9721.

Had I not lost my digi cam in the drink, I'd post a pic :rolleyes:

Oh yeah, here's on from a couple years ago...

http://www.donzi.net/hull/GTX2100021/388side.jpg

[Cuda]

I found the coupler, it was under the flywheel. :rolleyes:

Nate, I want the flame arrestor, I'll call you as soon as I get a chance.