raw water bracket

[MR.MAGIC]

anyone have a torque arm/bracket for a crank mount raw water pump for a 351 ford

[MOP]

Hi that bracket is very easy to Fab, most important thing is to position and secure hoses going to pump so they do not put pressure on it, the hoes should line up nice with outlets. A couple of the guys have used wire wound hoses without brackets or securing and the pumps bearing got hot. These are great pumps damn near trouble free.

Phil

[BZmarine]

i have a few of them. give me a few days to dig up. i can take a few pic of it. email me if interested. bzsmarine@yahoo.com or give me a call at 540-849-0953.

[MR.MAGIC]

HI BZMARINE
DID YOU GET MY EMAIL
YOUR PHONE # DID NOT WORK
LET ME KNOW WHEN YOU FIND THE BRACKET
THANKS

[RT]

I have a pump and bracket that bolts to timing cover and will be off right side. Also have a bunch of marine stuff for a 302 and most will fit your 351. All freshwater stuff. Send me your needs if interested, RT.

[JWCall]

Here I have a pic of mine.
http://www.donzi.net/photos/jwcall16.jpg
http://www.donzi.net/photos/pump1.jpg
Hope this helps

[BZmarine]

same pump i sent the pic to u... same pump i have..and yes the phone # works