PDA

View Full Version : Root's Garage Sale



Rootsy
04-01-2002, 10:10 PM
Well i have a bunch of SBC stuff that i need to clear out...

1. Stock mercruiser 5.7L roller camshaft (430/450 lift) $35
2. Stock Mercruiser Roller Lifters (16) $35
3. Stock Mercruiser pre-vortec valve springs and retainers $10
4. Stock stamped self guided rocker arms 1.5 ratio $10
5. 2 sets stamped non self guided rocker arms 1.5 ratio $10/set
6. 1 set 083 cylinder heads, complete, $50
7. 1 set 624 cylinder heads, complete, $50
8. 2 sets of connecting rods, $40/set
9. 1 5.7L factory roller camshaft cylinder block, 2 bolt main, needs to be bored $50
10. 1 5.7L 1 piece rear main seal crankshaft, good and clean, $25
11. 1 5.7L 2 piece rear main seal cranksahaft, good and clean, $25
12. 1 windage tray and main cap bolts $25
13. 1 sbc mercruiser oilpan for 2 piece rear seal block w/ oil pump pickup, $25
14. 1 flat tappet camshaft, good condition, w/ lifters, $10
15. 1 Velvet drive model A31-710, w/ bellhousings, $300
16. 1 Mercruiser bellhousing, $35
17. 2 cast iron 4V quadrajet intake manifolds, $25/ea
18. 1.6 ratio comp cams magnum roller tip rocker arms, $125
19. 1 5.7L flywheel $15
20. 1 Mercruiser points style distributor $25
21. 1 set sbc center bolt valve covers $10
22. 1 set sbc perimeter bolt valve covers $10
23. 4V mercruiser throttle cable bracket (mounts to rear studs of quadrajet carb) $15

there is more miscellaneous stuff.. if you have soemthing specific you are looking for just ask eh.

shoot me email if you are interested in any of this. jaroot@tdi.net

Thanks

Jamie