Cylinder Heads, Intake, Props, Etc... PHOTOS added....

[Rootsy]

I have and still have the following looking for a good home

1) GM 217 cylinder heads - Stock 86 up
Same heads used on 300hp crate motor
1.94/1.5 Valves - stock GM production
Valves/Seats lapped and trued 3 months ago
64CC Chambers
Seat Pockets cut for 1.45 OD Valve Springs
Guides cut to accept .570 ID Teflon Seals
Comes with Stock Valves and Teflon Seals
Installed.
Also have stock springs, retainers, etc
to go with them
no cracks, warpage, burnt valves or leaks

$150.00 / pair

http://www.donzi.net/photos/jaroot029.jpg

http://www.donzi.net/photos/jaroot030.jpg

http://www.donzi.net/photos/jaroot031.jpg

http://www.donzi.net/photos/jaroot035.jpg

2) Edelbrock #2104 Performer Intake manifold
Like new condition

$75.00 (50% of new - 1 year old)

http://www.donzi.net/photos/jaroot024.jpg

http://www.donzi.net/photos/jaroot027.jpg

3) 14 3/4 x 21 Mirage Prop, Solid Hub

$150.00

4) 14 3/4 x 21 Mercury Cleaver, good condition
but not perfect, runs fine with no vibration
did 63.7 on my 16 --> 7% slip calculated
Rubber hub

$125.00

http://www.donzi.net/photos/jaroot020.jpg

(21 cleaver left, junk vengence middle, 21 mirage right...)

5) Comp Cams Magnum Roller Tip Rockers 1.6:1
self guiding for non guided pushrods

$90.00 (50% of new - 1 year old)

if anyone is interested email me at jaroot@tdi.net
or 616 962 8257 X2118 if i get a chance i'll take and post photos

Thanks

Jamie

[HyperDonzi]

ill measure the diameter of my prop next time out. if there close ill think about the mirage or cleaver.

[Rootsy]

Photos added...

[Rootsy]

21 cleaver is sold...

the vengence went in the junk...

still have the 14 3/4 x 21 mirage for sale...

solid hub, good condition...

[Cuda]

Jamie, got the cleaver today, thanks!