Rootsy
07-15-2002, 09:49 PM
Replacing my intake with something a bit bigger so i figured i might as well try and sell what i have.
Edelbrock Performer Intake Manifold
fits sbc, Edelbrock P/N 2104
aluminum, dual plane, NON egr
both squarebore and spreadbore pattern accepted
Fits 86 - 95 splayed (72 degree) center bolts.
intake is 1 year old, has never seen salt water and is in good condition.
it has been primed and painted but there is absolutely NOTHING wrong with it, guaranteed.
no chips, dings, nicks, stripped threads, corrosion or pitting...
intake is 155 new.... i'll take 100 or i may consider a reasonable offer plus the cost of shipping of your choice. may also consider a trade for a set of aluminum finned 60's corvette valve covers which are in good condition...
you can email me at jaroot@tdi.net, probably the easiest way to get a hold of me... if you want to try to catch me by phone...
616 962 8257 X2118
Edelbrock Performer Intake Manifold
fits sbc, Edelbrock P/N 2104
aluminum, dual plane, NON egr
both squarebore and spreadbore pattern accepted
Fits 86 - 95 splayed (72 degree) center bolts.
intake is 1 year old, has never seen salt water and is in good condition.
it has been primed and painted but there is absolutely NOTHING wrong with it, guaranteed.
no chips, dings, nicks, stripped threads, corrosion or pitting...
intake is 155 new.... i'll take 100 or i may consider a reasonable offer plus the cost of shipping of your choice. may also consider a trade for a set of aluminum finned 60's corvette valve covers which are in good condition...
you can email me at jaroot@tdi.net, probably the easiest way to get a hold of me... if you want to try to catch me by phone...
616 962 8257 X2118