PDA

View Full Version : Volvo Props



Kent Perroux
04-30-2002, 07:55 AM
I have two props available that will fit on the Volvo 280 drive. Both are left hand. Both are blueprinted and balanced. I can offer a trial with deposit and S&H charge. Either one of these would cost over 700 to replace and then add for rehubbing for Volvo, then blueprinting. I have well over $1000 in the chopper alone.

I am changing over to a Bravo drive and was going to keep these and have them re-hubbed for the merc.

I had these on a slightly modified 18 Donzi 350ci, and they ran 68@5500 and 64@4500 (+/- 1mph) respectively. I really loved the merc chopper because it gave great bow lift and fantastic fast cruising. The spinelli is slightly less efficient because of the smaller blade area, but with a light load and trimmed, it made the boat fly.

14 x 24 Spinelli - $450

http://www.donzi.net/photos/kperroux08.jpg

14 x 26 Merc Chopper - $550

http://www.donzi.net/photos/kperroux09.jpg

You guys get first shot before they guy with the 60mph Bayliner is ready to try one.

Kent
(407) 736-3181

Donzified
04-30-2002, 08:59 PM
Will the prop fit a 270 w/17 spline shaft?

Kent Perroux
05-01-2002, 11:00 AM
14 x 26 Chopper is sold.

These props should fit a 270. You may have a slightly shorter shaft. Maybe someone else can answer that.

Kent

Donzified
05-01-2002, 08:46 PM
can you measure the lenth of the hub/how much is splined?Do you have the thrust washer/how long is it?Or can you measure the shaft the prop came off of.

Kent Perroux
05-02-2002, 08:03 AM
Donzified,

The Spinelli has a 17 pline Volvo hub.
The prop includes the the thrust washer and the spacer.

The spacer is the 1"(?) pipe cut to 5/8" long for this prop, a 1/2" thick thrust washer, and the back of the prop to the top portion where your washer to hold the prop on the shaft is 4". Total length from the ridge on the propshaft to the prop nut washer is 5-1/8".

If you want to try it, I will refund all but $25 for shipping if you return it with no damage within 10 days of receiving.

Kent

Kent Perroux
06-04-2002, 12:09 PM
Both Props SOLD!

Dave911
06-14-2002, 04:03 PM
Very much interested. Please e-mail me at
dnovick911@hotmail.com with your phone number. Or call me (west coast time) 714 404-8366. THANKS! :D

Dave911
06-14-2002, 04:04 PM
OK, I guess I should have read from the bottom. I AM DUMB.